Entering download mode [FiPy 1.0 + Pysense]
-
I have mounted a FiPy on a Pysense board and I'm trying to switch to download mode. I haven't been able to find any instructions whatsoever and I seem only able to get to this
rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT). Any help would be appreciated. -
@Filisia-Melissari With the pysense the pycom updater will switch the FiPy to download mode. (assuming you mean bootloader mode).
besides that, you can always force bootloader mode by connecting P2 to GND and pushing the reset button on the FiPy. P2 is available on the external IO header of PySense, the middle pin in the row with the square pin, or at the FiPy itself.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login