Setting up a single channel for connection to the gateway

  • Hi,

    I am planning to build a single channel gateway using the Lora Hat and Raspberry Pi 3 to send values from my Lopy4 to TTN. I've found a program from a tutorial but the person that programmed it lives in the states(USA).

    How can I modify this program so I can use it in my area?
    Any insights to this will help a lot and I'm open to hearing any suggestions
    Thank you.

    #Setup the single channel for connection to the gateway 
    for channel in range(0, 72): 
    for chan in range(0, 8): 
       lora.add_channel(chan,  frequency=freq,  dr_min=0,  dr_max=3)

  • @Benjamin-Mavinga Which region code are you using?

  • @Gijs I was trying to modify it to work in my country but I see now all I have to do is to find out how many available LoRa channels there are in then country and place it where " 72 " is.

  • The code you mention should work for a Lopy4.. Im not really sure what you're after here?

Log in to reply

Pycom on Twitter