MemoryErrors even with frozen modules?

[BetterAuto]

I am using an unmodified copy of Pycom's GoogleIOT library including its main.py which I have renamed testmain3.py. I have frozen this code into firmware 1.20.0.rc13 (can't use anything newer due to this bug.) It's running on a WiPy2 until my 3s arrive, which shouldn't be a problem because the Google code was written when the 2.0 was still somewhat common. And I've seen this run at least once. But now it will not run at all. What gives? I thought freezing would solve this--especially for a vendor-supplied bit of code that isn't terribly complicated.

>>> import testmain3
Connecting to WiFi *******************
Syncing time with time.google.com.
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "testmain3.py", line 55, in <module>
  File "umqtt.py", line 105, in connect
MemoryError: memory allocation failed, allocating 40960 bytes
>>>

As you can see, they've been frozen:

>>> os.listdir()
['boot.py', 'cert', 'config.py', 'lib', 'main.py', 'sys']
>>> help('modules')
MQTTClient        framebuf          struct            umqtt
MQTTConst         gc                sys               uos
MQTTDeviceShadow  google_iot_core   testmain          uqueue
MQTTLib           hashlib           testmain3         ure
MQTTMsgHandler    json              time              uselect
MQTTShadowManager machine           ubinascii         uselect
__main__          math              ubinascii         usocket
_boot             micropython       ucollections      ussl
_main             network           ucrypto           ustruct
_thread           os                uctypes           utime
array             pycom             uerrno            utimeq
binascii          queue             uerrno            uzlib
builtins          re                uhashlib          websocket
cmath             select            uio
crypto            socket            ujson
errno             ssl               umachine
Plus any modules on the filesystem
>>>

[livius]

@BetterAuto said in MemoryErrors even with frozen modules?:

testmain3

Frosing modules is not a magic trick. If there are dynamic structures then they reside in RAM.
And wipy 2 have really big RAM limits.
I fight with it long to be able to use 12 sensors and display data on ePaper 4.2 inch (400x300 px) but solved it finally.

If yuu need to run on it something big you must split modules into parts.
Import one part and when used unload it and go to next part. Hard work but can be done.

[BetterAuto]

@livius said in MemoryErrors even with frozen modules?:

@BetterAuto said in MemoryErrors even with frozen modules?:

testmain3

Frosing modules is not a magic trick. If there are dynamic structures then they reside in RAM.
And wipy 2 have really big RAM limits.
I fight with it long to be able to use 12 sensors and display data on ePaper 4.2 inch (400x300 px) but solved it finally.

If yuu need to run on it something big you must split modules into parts.
Import one part and when used unload it and go to next part. Hard work but can be done.

Understood--but this is code supplied by Pycom two years ago when the WiPy2 was more common. And it worked once. Can't see why it wouldn't work again, especially when frozen.

[livius]

@BetterAuto

It depend what you run before this import.
do this first:

import gc
print(gc.mem_free())
gc.collect()
print(gc.mem_free())

and then try to import your module if there is 40960 bytes free.
It should be able to import on start of the board as after reset for me it is e.g. 57264

[BetterAuto]

I also sprinkled gc.collect() all through the code, at the start and after each operation, same result.

[livius]

@BetterAuto
but i mean
restart your device - do not run any code
and then do above commands

import gc
print(gc.mem_free())
gc.collect()
print(gc.mem_free())

and then

import testmain3

same result?
also post here what you got with such print commands as output - how much memmory is free before import testmain3

[BetterAuto]

I'm at a dead end with this. As mentioned earlier I am required to stick to only an older firmware, but that has a WLAN() bug. I detail the issue more here:
https://forum.pycom.io/topic/7029/anyone-using-google-cloud-not-on-pybytes?_=1620435408202

Thanks for attempting to help!