Pymesh online software update doesn't work after site update
Tommaso Patriti last edited by Tommaso Patriti
(sysname='FiPy', nodename='FiPy', release='1.20.2.r6', version='v1.11-c5a0a97 on 2021-10-28', machine='FiPy with ESP32', lorawan='1.0.2', sigfox='1.0.1', pybytes='1.7.1')
Normally after the Pymesh firmware became 1.20.2.rc11, the Pymesh library is installed, and at reboot the device started automatically the LoRa Mesh network.
Now nothing changes.
Requesting: manifest.json?current_ver=1.20.2.r6&sysname=FiPy&wmac=f008d1ccdd9c&ota_slot=0x210000 to software.pycom.io:443 with SSL? True Wrapping socket Sending request Requesting: downloads/appimg/firmware_FiPy_1.20.2.r6-pybytes.bin to software.pycom.io:443 with SSL? True Wrapping socket Sending request Full Update Image detected. Restart the device to load the new firmware. ets Jun 8 2016 00:22:57
Even after the update all the pymesh modules do not work
I seem to remember that the old download link was: https://software.pycom.io/downloads/appimg/firmware_FiPy_1.20.2.rc11-pymesh.bin