Input Voltage for Pin
-
Hello There,
I would like to confirm that Max Input voltage for an input to WiPy 2.0 is 3.3V. Am I right? ...so If I connect a switch to a pin, it has to be at 3.3v.
Cheers
ColombianAus -
According to the data sheet, the maximum input voltage for a digital input is 3.3V. The maximum input voltage for the analog Pins vary according to the attenuator setting and should not higher than the analog range. I remeber to have seen a spec about that, but cannot find it again.
If you connect a switch with a longish wire, please add protection circuitry, at least an RC lowpass (e.g. 100k in series/1nF to GND) element as close as possible to the input to suppress spikes.
Please not
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login