pytrack dfu 0.0.7 no serial port
-
Today I updated my pytrack to the latest firmware (pytrack_0.0.7.dfu) with status "Done!". After update I am able to login via telnet over Wi-fi, but there is no serial port any more, only pytrack device. What should I do to bring serial port back?
I am using:
- ATOM 1.21.1 x64
- Microsoft Windows [Version 10.0.16299.19]
- Pymakr 1.2.0
- Python 3.6.3 (v3.6.3:2c5fed8, Oct 3 2017, 17:26:49) [MSC v.1900 32 bit (Intel)] on win32
Update tools:
- dfu-util 0.8
- zadig-2.3.exe
Thanks.
-
@kanalizator after installing the dfu driver, the PyTrack will be detected as a a dfu device and not as a COM device. You have to deinstall the dfu driver, so that PyTrack will be detected a COM device again. You can see this in the device manager. But only for a few seconds. If you plugin your device it will show up for a few second as such a device and will then disapear.
-
This post is deleted! -
Every update seems to be different. This time, the PyTrack was detected as a COM device. With the same number as before :). But I was not able to connect. To fix it, I had to select show unconnected devices in the device manager, browsed for the usk driver and deleted the unknown and unconnected device.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login