GPy pinouts
-
The GPy pinout show only three pins that are being used for the LTE NBIoT module - GPIO5, GPIO7, & GPIO19. These pins only cover LTE_Rx, LTE_WAKE & LTE_SLEEP functions. I assume there are other LTE connections such as LTE_Tx? If so, are these connected ESP32 pins not exposed on the pinout of the GPy module, or are there other pins which can not be used?
This is important as I have a project which may migrate from LoPy4 to GPy for an NBIoT network trial, so I want to ensure my PCB is not using any GPIOs that are tied in with the LTE modem functionality . -
Those pins are connected to the ESP32 but they are not available on the pin header, they are connected internally on the module.
TX = GPIO23
RTS = GPIO18I will get these added to the pinout diagrams
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login