Telstra LTE Cat-M Working on FiPy .... Just..
-
Hello everyone,
Apologies for the delays here. We have a session with the Telstra team this week to sort this out with their help. We'll update everyone after that.
Cheers,
Daniel -
@daniel i have been able to connect consistently to LTE Telstra using below band settings:
lte.send_at_cmd('AT!="addscanfreq band=28 dl-earfcn=9410"')In comparaison, latest firmware v 1.17.2.b1 is not working when I calling attach(band=28); Do you mind checking with telstra about your earfcn parameter?
-
@ioag said in Telstra LTE Cat-M Working on FiPy .... Just..:
9410
That's interesting... I'll ask Telstra. How did you come up with the value of 9410? The central value should be 9435 according to the specs...
-
@daniel Telstra staff gave me this value to try, worked first go :)
-
@timh The Pycom firmware times out 10 seconds after sending a command. "AT+COPS=?" takes longer to respond. I've seen that by hooking on a pair UART/USB bridges to the link between the ESP32 and the Sequans modem. I just wanted to see what's going on there.
-
@ioag Any chance you could share your Telstra connect code? I must be doing something wrong...
Does anyone have an update on the stability issues?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login