Can the fipy handle transient spikes of -0.5V on the analog pins?
-
Hi,
Can the fipy handle transient spikes of -0.5V on the analog pins?
I am using a voltage divider and a diode for protection but occasionally it goes to negative half a volt and I couldn't see in the documentation whether it could handle that?
-
@edward-dimmack The data sheet tells: -0.3 - 3.6V as maximum ratings. If teh source impedance is high, it should withstand a little bit more than that. Us a shottky diode (e.g. 1N5711, BAT48) for input protection, which has a lower forward voltage.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login