MemoryError: memory allocation failed, allocating 175 bytes

[Marco den Hartog]

@robert-hh Great I am going to try that.

[Marco den Hartog]

@robert-hh Hi I have tried image 1.6.9.b1 but when I put an .mpy cross compiled file in the lib directory or another directory it is complaining that it can't find the module ImportError: no module named 'bme280'. When I put the normal .py file there is no problem. Is image 1.6.9.b1 really supporting cross compiled files out of the box. Do you have another suggestion for me otherwise I need to compile everything and make my own image.

[robert-hh]

@Marco-den-Hartog Maybe it's not. I'm building the images myself since they were first published, and always added that config line myself. So I had pre-compiled and frozen code support before Pycom enabled it. It was in the code from the beginning on.
On a Linux machine, it's no problem to build the image. Only flashing it could be a problem, since USB support from a virtual machine was always fragile.
If that fails, you could use the manual procedure as written here: https://software.pycom.io/downloads/LoPy_868-1.6.0.b1.tar.gz
That would require to build your own gz-package, or you use the -f option. I never did that, but that's the way I would try.

[Marco den Hartog]

@robert-hh It isn't supported in that version. I am already busy building my own image with the specified config line. Only then I know for sure that it will work :)

[robert-hh]

@Marco-den-Hartog Once you get used to it, you don't want to miss it. That way, you can also put you own code into flash, and useful other scripts. It#s only a shame that PyCom updates the repository so tardy,

[Marco den Hartog]

@robert-hh You have a lot experience in manual compiling the source code. I am getting the following error on the end. I am using the following code
https://github.com/pycom/pycom-micropython-sigfox/blob/master/esp32/README.md
LINK build/LOPY/release/application.elf
text data bss dec hex filename
961873 170156 73056 1205085 12635d build/LOPY/release/application.elf
Building partitions from lib/partitions.csv...
Traceback (most recent call last):
File "/home/serveradmin/pycom-esp-idf/components/partition_table/gen_esp32part.py", line 356, in <module>
main()
File "/home/serveradmin/pycom-esp-idf/components/partition_table/gen_esp32part.py", line 345, in main
table.verify()
File "/home/serveradmin/pycom-esp-idf/components/partition_table/gen_esp32part.py", line 83, in verify
for p in sorted(self):
TypeError: unorderable types: PartitionDefinition() < PartitionDefinition()
application.mk:397: recipe for target 'build/LOPY/release/lib/partitions.bin' failed
make: *** [build/LOPY/release/lib/partitions.bin] Error 1

Do you know what I am missing here ?

I agree that it is a pitty that the code isnt't often updated in the github. That would be great if the guys of Pycom will do that more often.

Thx.

[robert-hh]

@Marco-den-Hartog I see now, that the second line in README looks wrong. so the make command should be:

make BOARD=LOPY -j5 TARGET=boot
make BOARD=LOPY -j5 TARGET=app

I personally use a GNUmakefile, in which I add the extra settings. It looks like:

BOARD = LOPY
$(info BOARD = $(BOARD))
FROZEN_MPY_DIR = modules
$(info FROZEN_MPY_DIR = $(FROZEN_MPY_DIR))
include Makefile

And then I either type (very rarely):
make TARGET=boot
or just:
make
and them
make flash
I tried to reproduce your error, but do not get it.

[robert-hh]

@Marco-den-Hartog Found it. It#s a python version problem.

try in the second make step:
make BOARD=LOPY -j5 TARGET=app PYTHON=python2
You need python2 installed for that.

[Marco den Hartog]

@robert-hh Thx a lot robert. Yes I am using python3 because in their readme file they say " MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc., and additionally "async" keyword from Python 3.5). I will switch over to python2 to see if that is working.

[Marco den Hartog]

@robert-hh Robert thx for pointing me in the right direction. I am able to compile the image. Play time.

[robert-hh]

@Marco-den-Hartog Micropython itself implements Version 3.4, but the scripts used in the build procedures on PC are a mix of Python2/Python3 code. For some branches you need Python2, for others Python3. for instance esptool.py was only recently Ported to Python3.