LoPy stops detecting BLE advertisements
-
@jcaron Hi,
only the firmware :-)
I did not touch anything in my code because I was pretty sure it was working as is.
Now I am patiently waiting for the death (hope not) of two WiPy 3 with the very latest firmware that are running since 47 hours. -
Hello,
I'm having the same problems with reading the BT advs. My setup is a lopy with a deepsleep shield and 3 ruuvi tags that adv every second. The ruuvis are placed about 3 meters apart. The lopy is on 1.17.0.b1.
The process is: read BT data, go to deepsleep for 15 sec, wake up, read BT data, deepsleep, etc.
I have tried first with the BT example in the pycom docs. The scan was set to 20 seconds. In about 40% of the cases the lopy would not read the data from all the 3 ruuvis.
Then i tried with the deinit/init. Scan for 10 sec, if not all 3 ruuvis read, deinit/init, scan for another 10 sec. It reduced the loss to only about 10%.
In the real case the deepsleep interval will be 1 hour. So, if it doesn't read all the ruuvis, some results will be 2 hours apart or even more, depending on luck, i guess :)
Is there any plan or update on this problem?
Thank you
-
My lopy4 arrived and i tested with it, too, although i was pretty sure it wouldn't make a difference. It didn't, it does the same thing.
I left my lopy running since yesterday noon and from 270 readings, 223 were correct. So that's around 17-18% loss.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login