Connection to LoPy through Pysense fails
-
Hello,
Using a LoPy connected through a Pysense board, once the REPL prompt over serial is reached, the connection stops after a few seconds and Pymakr console outputs the following error:
Failed to connect (Error: Error: Broken pipe, cannot drain). Click here to try again.This error is not reproduced when reaching the REPL prompt with minicom.
This error is not reproduced in Pymakr when using an expansion board instead of a Pysense board.
Thank you.
NB: I have initially reported the issue on the Pymakr-Atom git repository.
-
A temporary fix: downgrade Pymakr Atom package from version 1.0.2 to version 1.0.1.
Curious to know where the problem lies in version 1.0.2 for my LoPy-Pysense combo.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login