First time using the LoPy
-
Hi! I recently started a project with the LoPy, it is however not a new board. I has been used one year ago in a different project.
I would like to keep the code that is still on it, how do I do this?
After I got the code off, how do I get started? Do I require a log-in/registration/username and password? -
@hansjorg2 You should be able to connect to it by both Telnet and FTP. The default IP address is 192.168.4.1, the SSID somethinglike LOPY-xxx-xxx. The AP password is www.pycom.io. The credentials for Telnet and ftp are:
user: micro
password: python
These are the defaults. Alternatively, you can hook up a serial terminal either with a USB/TTL-serial adapter or the pycom expansion board. That gives you a terminal access. Tools like adafruit's ampy then allow access to the files.
All that is well documented. I reccomend to look into the starting sections of the documentation at https://docs.pycom.io/ -
@robert-hh I don't have acces to wifi, it has been disabled to save power.
I do have the expansion board, but I can't find "adafruit's ampy" is this only for Linux?
Thank you for your reply!
-
@hansjorg2 Ampy is a a python program. You'll find it here: https://learn.adafruit.com/micropython-basics-load-files-and-run-code/install-ampy
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login