Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    Fresh FiPy - getting hot?! FW update (1.11.0.b1) not working...

    Scheduled Pinned Locked Moved FiPy
    temperaturefipyfirmware update
    15 Posts 6 Posters 3.6k Views 6 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • robert-hhR Offline
      robert-hh @t.pirk
      last edited by

      @t-pirk The FiPy should have already an image loaded, which will make the heartbeat LED blink every few seconds. Did you see that?
      Are you sure you've placed the FiPy into the board in the right orientation?

      1 Reply Last reply Reply Quote 1
      • M Offline
        misterlisty
        last edited by

        Where should windows downloads the pycom drivers from? I see Pysense in the oTher devices section of harwdare

        X 1 Reply Last reply Reply Quote 0
        • M Offline
          misterlisty
          last edited by

          When i plug in a fipy connected to pytrack or pysense...should it create a COM port?

          robert-hhR 1 Reply Last reply Reply Quote 0
          • X Offline
            Xykon administrators @misterlisty
            last edited by

            @misterlisty The Windows 7 driver for Pytrack & Pysense is found here: https://docs.pycom.io/chapter/pytrackpysense/installation/drivers.html

            Christian Ehlers

            1 Reply Last reply Reply Quote 0
            • robert-hhR Offline
              robert-hh @misterlisty
              last edited by

              @misterlisty Since the USB/UART bridge is located on the pysense to pytrack board, connecting these boards alone w/o a xxPy attached to it should already create the appropriate COM port. If you, there is a Windows driver issue.

              C 1 Reply Last reply Reply Quote 0
              • C Offline
                crumble @robert-hh
                last edited by

                If it not listed as a COM device, check if the dfu driver is installed. On my win7 I had to deinstall the dfu driver after every uptdate of pytrack, otherwise the pytrack was listed for a few seconds as a dfu device before it disapeared from the device manager.

                I am still on 1.10.x and 0.0.7 so it may not solve your problem, but worth a try.

                1 Reply Last reply Reply Quote 0
                • T Offline
                  t.pirk
                  last edited by t.pirk

                  Thanks for the feedback and sorry for missing info... =)
                  I'm with Win 10 and have now tried both FiPys, one in PyTrack, one in PySense (glad I backed the combo =) - and with two different USB cables. Unfortunately the problem persists:
                  0_1513778747889_f43f16e0-d8f7-4d84-a8a7-8d4b6b200a7a-grafik.png

                  Win 10 had no problem to assign COM ports to both boards, though.
                  ...and the blue heartbeat was there from start, too.

                  1 Reply Last reply Reply Quote 0
                  • T Offline
                    t.pirk @Xykon
                    last edited by

                    @xykon Output on serial:
                    rst:0x1 (POWERON_RESET),boot:0x16 (SPI_FAST_FLASH_BOOT)
                    configsip: 0, SPIWP:0xee
                    clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
                    mode:DIO, clock div:1
                    load:0x3fff9028,len:8
                    load:0x3fff9030,len:1076
                    load:0x4009fa00,len:0
                    ho 12 tail 0 room 4
                    load:0x4009fa00,len:15344
                    entry 0x400a070c
                    MicroPython v1.8.6-834-g5677703c on 2017-11-13; FiPy with ESP32
                    Type "help()" for more information.

                    1 Reply Last reply Reply Quote 0
                    • X Offline
                      Xykon administrators
                      last edited by Xykon

                      From the error message I can see that the firmware update tool isn't able to connect to the FiPy. But since you were able to see general output from the module over serial means that the serial communication is working in general.

                      I suggest you check three things:

                      Make sure that no other program (Putty, Atom, Visual Studio Code) is open and using the COM port.

                      Make sure you have at least Version 0.6 of the Pytrack / Pysense firmware installed.

                      Make sure you select the checkbox for Pytrack/Pysense manually when selecting the com port in the firmware update tool.

                      Christian Ehlers

                      1 Reply Last reply Reply Quote 0
                      • D Offline
                        duhmojo
                        last edited by

                        Same here. I started playing with my FiPy's last night and I'm finding that they get quite hot, like super hot compared to my Lopys and Wipys, which can run non-stop and barely generate any heat. I'm using the latest everything as of today (Jan 4, 2018).

                        Here's my details:
                        Dev OS: MacOS
                        Fipy firmware: 1.12.0.b1
                        PySense firmware: 0.0.8 (dfu installed)
                        PyTrack firmware: 0.0.8 (dfu installed)

                        When I USB tether either of my Fipys it they start to warm up within 5 seconds it clearly warm to the touch. After a couple of minutes its hot. After an hour it doesn't melt down but its really hot.

                        I've tried both the PySense, PyTrack and Expansion boards. The Fipys all are hot.

                        The USB cables are fine. I have a collection and I can tether all manner of things, including my Lopys which don't heat up.

                        FYI, I noticed that you can't flash the Fipy using the Expansion board. It'll only flash with the PySense or PyTrack boards. When I try I get the dreaded "Can't figure out if this is a PySense/PyTrack. Connecting.... Failure!" When I select the Expansion board + Fipy USB device the PySense/PyTrack checkbox is already off. I then click through and end up with the failure. Not sure if Pycom is carrying newer Expansion boards that work. Either this is a bug, or a really inconvenient over sight for anyone ordering just the Fipy and Expansion board. (ugh)

                        X 1 Reply Last reply Reply Quote 0
                        • X Offline
                          Xykon administrators @duhmojo
                          last edited by

                          @duhmojo We are aware that the FiPy modules can get quite warm... we are waiting for Sequans to provide a new firmware with better power & thermal management.

                          Did you install the jumper wire and press the reset button before trying the upgrade in the Expansion Board?

                          Christian Ehlers

                          D 1 Reply Last reply Reply Quote 0
                          • D Offline
                            duhmojo @Xykon
                            last edited by

                            @xykon Thanks Xykon. Yes, I connected a wire between 23 and GND before plugging it in and flashing.

                            I think if there are thermal issues affecting all Fipys and its a known issue you should slap a sticky note or something on the site. I mean all the Fipys just went out recently. t.pirk and myself can't be the only ones noticing this.

                            Should we not use the Fipys until a fix is available? I don't want to damage my units.

                            1 Reply Last reply Reply Quote 0

                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                            With your input, this post could be even better 💗

                            Register Login
                            • 1 / 1
                            • First post
                              Last post

                            Pycom on Twitter

                            Pycom