cant tell if its a pysence or pytrack... upgrade failed'
-
Just got new fipy and pytrack today.
It shows up on the COM ports, is selectable by 'pycom firmware update'
updater responds with "cant tell if its a pysence or pytrack. upgrade failed'Cant find anything on this issue, please advise.
-
@laputa
Have you update the firmware on the Pytrack yet? It should be done first.Instructions are at:
https://docs.pycom.io/chapter/pytrackpysense/installation/firmware.htmlIf you're on Windows you can use the DFU driver I posted: http://metavurt.net/software/drivers/PyTrack_DFU.zip
to skip the Zadig section and go straight to
dfu-util-static.exe -D pytrack_0.0.8.dfu -
@jmarcelino said in cant tell if its a pysence or pytrack... upgrade failed':
dfu-util-static.exe -D pytrack_0.0.8.dfu
Thank you, the USB upgrade I was using was from an old post. Your zip process worked, and the upgrade was successful.
Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login