FiPy microcontroller network compatibility/compliance
-
Hello all,
In Greece, the cellular provider COSMOTE is opening up their Narrowband network and its frequency will be LTE @800MHz.
I would like to verify that the microcontroller listed here: https://gr.mouser.com/ProductDetail/Pycom/FiPy?qs=%2Fha2pyFaduiN1LDUqXKJgtbmxvyrxeuC%252bZqv%252blXdLnwFzvBRdcyq0TD%2FdejF%2FrUIis compliant to be used with this frequency. I checked the spec sheet on the site, and found no mention of this. I need it verified by someone, before we can purchase the part for development.
A quick response would be greatly appreciated.!
Thank you,
M. -
Our module works with Band 20 (800Mhz) but I cannot guarantee when/if we will work with that particular operator yet.
-
so in this case, how would you recommend going about finding a module that I can be sure will work here in Greece in that band range?
thank you
-
@marilenam
The guaranteed option is to contact your operator directly and ask what they support, all operators run testing/certification programs -
Yes, my provider confirms they are testing on this band, so we're good compatibility wise. Thank you very much for your prompt responses!
-
@marilenam
Ok, but please note there is a lot more to NB-IoT than just the frequency.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login