[Solved] LoPy firmware update issues
Burgeh last edited by Burgeh
I just have received a LoPy SOIC and a Pytrack expansion board, and I am new to the system. However, I have been following the Pycom.io tutorial succesfully. I only have one issue, I cannot seem to upgrade the firmware on my LoPy using the Pytrack expansion board.
The Pytrack has the correct driver of libusbK(V126.96.36.199), I confirmed through use of the Zadig software.
The current LoPy OS info is release =1.0.0.b1, version =v1.8.6-237-g9d21f17
My PC OS is windows 10, and I am using the windows Download from here: https://docs.pycom.io/chapter/gettingstarted/installation/firmwaretool.html
COM port appears correct COM3 in my case, I connect to it through ATOM, and it is set on the firmware software. I've tried unchecking the high-speed box, making sure atom is not up, below will be the settings I used.
Thanks in advance!
To get your board updated for online flashing please run the following command on your board:
import machine,binascii binascii.hexlify(machine.unique_id())
and send the output to email@example.com asking for your board to be changed from LoPy4 to LoPy.
livius last edited by
Burgeh last edited by
Thanks you helped me refocus my efforts towards the DFU files, not just the drivers. I needed to use the cmd console to update the dfu files...That worked!
-Additionally, it appears I programmed one of my LoPy 1 devices as a LoPy 4, and I cannot re-select that board type when I download the firmware, any suggestions? Or is there little difference?
livius last edited by livius
did you updated firmware of your
only after above step you can do update of your lopy throught pytrack