Welcome to the Pycom forum Forum
    • \[\[global:header.categories\]\]
    • \[\[global:header.recent\]\]
    • \[\[global:header.tags\]\]
    • \[\[global:header.popular\]\]
    • Login

    Explore Pybytes | Official Documentation | Report a Firmware Bug/Issue | GitHub

    Trouble with FiPy code not working

    Scheduled Pinned Locked Moved FiPy
    fipycode
    33 Posts 8 Posters 9.8k Views 8 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D Offline
      Dylan @Ralph
      last edited by

      @ralph Ok Cool, it all worked on the home computer so I managed to get a bit of work done over the weekend anyway.

      @seb No problem, I'll put both here next post.

      1 Reply Last reply Reply Quote 0
      • D Offline
        Dylan @seb
        last edited by seb

        @seb
        The code that worked on LoPy but not on FiPy. Worth noting that the LoPy was 1.11.0.b1 which is the version I downgraded the FiPy too.

        Also how do I make the code look all neat in posts like I've seen elsewhere?

        from network import LoRa
        from pytrack import Pytrack
        from coords import Coords
        from CayenneLPP import CayenneLPP
        from L76GNSS import L76GNSS
        from LIS2HH12 import LIS2HH12
        import machine
        from machine import Pin
        from machine import I2C
        import socket
        import binascii
        import struct
        import time
        import array
        # Initialize LoRa in LORAWAN mode.
        lora = LoRa(mode=LoRa.LORAWAN, public=1,  adr=0, tx_retries=0)
        # Remove default channels
        dev_addr = struct.unpack(">l", binascii.unhexlify('269928E2'.replace(' ','')))[0]
        nwk_swkey = binascii.unhexlify('7A7E7000000F93BD1BB4693127C374FE'.replace(' ',''))
        app_swkey = binascii.unhexlify('F93BD1BBBA53BBF3B4096A72115E9F5D'.replace(' ',''))
        
        for index in range(0, 72):
            lora.remove_channel(index)
        
            lora.add_channel(index, frequency=918000000, dr_min=0, dr_max=3)
        
        lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey), timeout=0)
        # wait until the module has joined the network
        
        
        while not lora.has_joined():
            time.sleep(5)
        
        # remove all the non-default channels
        
        for i in range(8, 15):
            lora.remove_channel(i)
        # create a LoRa socket
        s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
        
        # set the LoRaWAN data rate
        
        s.setsockopt(socket.SOL_LORA, socket.SO_DR, 3)
        
        # make the socket blocking
        s.setblocking(False)
        time.sleep(2.5)
        while lora.has_joined():
            acc = LIS2HH12()
            pitch = acc.pitch()
            roll = acc.roll()
            time.sleep(1)
            py = Pytrack()
            battery = py.read_battery_voltage()
            battery = battery * 10
            cayenne = CayenneLPP()
            time.sleep(1)
            l76 = L76GNSS(py, timeout=10)
            lat1 = str(l76.lattitude())
            lon1 = l76.longitude()
            if len(lat1) > 5:
                lona = lat1
                lata = lon1
                meta = 9500
                lat = float(lona)
                lon = float(lata)
                met = float(meta)
                cayenne.add_gps(4, lat, lon, met)
                cayenne.add_temperature(3, battery)
                s.send(cayenne.get_buffer())
        
            if len(lat1) < 5:
                cayenne = CayenneLPP()
                cayenne.add_temperature(3, battery)
                s.send(cayenne.get_buffer())
                print('No fix')
            rx = s.recv(256)
            if rx:
                print(rx)
            machine.deepsleep(890000)
        
        1 Reply Last reply Reply Quote 0
        • M Offline
          MJ
          last edited by

          @ralph Is the Pymakr version 1.2.10 compatible for the Atom 1.25.0 already? As until now i am unable to install the Pymakr 1.2.10 and show me failed to search for the Pymakr package " connect ETIMEDOUT 50.16.223.157.443". May i know how can i solve this? Thank you.

          D 1 Reply Last reply Reply Quote 0
          • D Offline
            Dylan @MJ
            last edited by

            @mj
            Not sure if this will help but I just downloaded the VScode and got it running so I can do all I need to do in that.

            https://docs.pycom.io/chapter/pymakr/installation/vscode.html

            M 1 Reply Last reply Reply Quote 0
            • M Offline
              MJ @Dylan
              last edited by

              @dylan Thanks for sharing but i am using the Atom not the Visual Studio. But until now the Pymakr still cannot installed.

              D 1 Reply Last reply Reply Quote 0
              • D Offline
                Dylan @MJ
                last edited by

                @mj I've tried lots of different things to get Atom working again with no luck, I just didn't even realize Visual studio was an option, I'm liking it so far.

                M 1 Reply Last reply Reply Quote 0
                • M Offline
                  MJ @Dylan
                  last edited by

                  @dylan Is it Visual Studio code work as the same as the Atom? The language using also the same?

                  D 1 Reply Last reply Reply Quote 0
                  • D Offline
                    Dylan @MJ
                    last edited by

                    @mj Very similar, the biggest difference I found is the Run/Upload/Download buttons are down the bottom left and I guess it all looks slightly different ofcourse.

                    1 Reply Last reply Reply Quote 0
                    • sebS Offline
                      seb
                      last edited by

                      @Dylan
                      I would recommend adding some print statements into the code you shared to see where it gets stuck on your fipy

                      D 1 Reply Last reply Reply Quote 0
                      • D Offline
                        Dylan @seb
                        last edited by

                        @seb Yeah I've been putting print("Line #") to catch the errors, excellent way of debugging. However in this case it makes it all the way to the end, it just never wakes back up from either the deepsleep I have above or the time.sleep(10) I use for quick testing (a print is always on the last line of code to check it makes it there).

                        sebS 1 Reply Last reply Reply Quote 0
                        • sebS Offline
                          seb @Dylan
                          last edited by

                          @dylan

                          two things

                          1. Code after a deepsleep will never run, once the device goes to deepsleep and wakes up it will be just like the reset button was pressed, it does not continue execution from where it went to sleep

                          2. I see no reason why your module should lock up and not wake from deep sleep with the code sample above, Have you tried the latest firmware?

                          D 1 Reply Last reply Reply Quote 0
                          • D Offline
                            Dylan @seb
                            last edited by

                            @seb 1. This is true, I had many prints throughout and I'm reasonably sure I thought of that haha
                            2. This was tried on the latest firmware and pytrack updates as these were new FiPys just arrived. I've had a few things go right for me so I have a some spare time, I might update a FiPy and try to recreate the error and work from there.

                            L 1 Reply Last reply Reply Quote 0
                            • L Offline
                              livius @Dylan
                              last edited by

                              @dylan said in Trouble with FiPy code not working:

                              This was tried on the latest firmware and pytrack updates as these were new FiPys just arrived. I've had a few things go right for me so I have a some spare time, I might update a FiPy and try to recreate the error and work from there.

                              this does not guarantee that you have recent firmware there

                              think about people first, then computers

                              D 1 Reply Last reply Reply Quote 0
                              • D Offline
                                Dylan @livius
                                last edited by

                                @livius I checked that I was downloading the most recent firmware from the most recent firmware upgrader aswell (excellent work there compared to how it was back in November, very user friendly). I believe the current firmware updater even tells us when it needs its own update so I'm pretty sure everything should be up to date there. But I've been wrong before so I'll double check everything at some point this week. I'll check back in when I've re-created the issue or if it works.

                                X 1 Reply Last reply Reply Quote 0
                                • X Offline
                                  Xykon administrators @Dylan
                                  last edited by

                                  @dylan said in Trouble with FiPy code not working:

                                  I believe the current firmware updater even tells us when it needs its own update so I'm pretty sure everything should be up to date there.

                                  Yes the GUI updater will check for updates on start and tell you if you're using the latest version or if there is an update. It should currently say: "Version: 1.12.0.b0 (latest) on the welcome screen. We also made this version of the firmware updater mandatory so you cannot use an older version and successfully update the board.

                                  Christian Ehlers

                                  D 1 Reply Last reply Reply Quote 0
                                  • D Offline
                                    Dylan @Xykon
                                    last edited by seb

                                    @xykon @livius @seb I have re-created the problem and it still exists.

                                    I updated my FiPy from 1.11.0.b1 to the most recent 1.17.3.b1 with the Pycom firmware updater 1.12.0.b0.

                                    The only change I made to anything was upgrading the firmware and now the FiPy no longer wakes up from the time.sleep at the end. The code is here:

                                    from network import LoRa
                                    from pytrack import Pytrack
                                    from coords import Coords
                                    from CayenneLPP import CayenneLPP
                                    from L76GNSS import L76GNSS
                                    from LIS2HH12 import LIS2HH12
                                    import machine
                                    from machine import Pin
                                    from machine import I2C
                                    import socket
                                    import binascii
                                    import struct
                                    import time
                                    import array
                                    # Initialize LoRa in LORAWAN mode.
                                    lora = LoRa(mode=LoRa.LORAWAN, public=1,  adr=0, tx_retries=0)
                                    # Remove default channels
                                    dev_addr = struct.unpack(">l", binascii.unhexlify('269928E2'.replace(' ','')))[0]
                                    nwk_swkey = binascii.unhexlify('7A7E7000000F93BD1BB4693127C374FE'.replace(' ',''))
                                    app_swkey = binascii.unhexlify('F93BD1BBBA53BBF3B4096A72115E9F5D'.replace(' ',''))
                                    
                                    for index in range(0, 72):
                                        lora.remove_channel(index)
                                    
                                        lora.add_channel(index, frequency=918000000, dr_min=0, dr_max=3)
                                    
                                    lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey), timeout=0)
                                    # wait until the module has joined the network
                                    
                                    
                                    while not lora.has_joined():
                                        time.sleep(5)
                                    
                                    # remove all the non-default channels
                                    
                                    for i in range(8, 15):
                                        lora.remove_channel(i)
                                    # create a LoRa socket
                                    s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
                                    
                                    # set the LoRaWAN data rate
                                    
                                    s.setsockopt(socket.SOL_LORA, socket.SO_DR, 3)
                                    
                                    # make the socket blocking
                                    s.setblocking(False)
                                    time.sleep(2.5)
                                    while lora.has_joined():
                                        acc = LIS2HH12()
                                        print("Line 51")
                                        xyz = acc.acceleration()
                                        x = xyz[0]
                                        y = xyz[1]
                                        z = xyz[2]
                                        time.sleep(1)
                                        py = Pytrack()
                                        battery = py.read_battery_voltage()
                                        battery = battery * 10
                                        cayenne = CayenneLPP()
                                        time.sleep(1)
                                        l76 = L76GNSS(py, timeout=10)
                                        lat1 = str(l76.lattitude())
                                        lon1 = l76.longitude()
                                        if len(lat1) > 5:
                                            lona = lat1
                                            lata = lon1
                                            meta = 9500
                                            lat = float(lona)
                                            lon = float(lata)
                                            met = float(meta)
                                            cayenne.add_gps(4, lat, lon, met)
                                            cayenne.add_temperature(6, battery)
                                            cayenne.add_accelerometer(5, x, y, z)
                                            s.send(cayenne.get_buffer())
                                    
                                        if len(lat1) < 5:
                                            cayenne.add_accelerometer(5, x, y, z)
                                            cayenne.add_temperature(6, battery)
                                            s.send(cayenne.get_buffer())
                                            print('No fix')
                                        rx = s.recv(256)
                                        print("Line 83")
                                        if rx:
                                            print(rx)
                                        print("Line 86")
                                        time.sleep(10)
                                    

                                    To double check everything I just used the firmware updater 1.12.0.b0 to downgrade to 1.11.0.b1 and its now waking up and repeating the code as expected:

                                    Line 51
                                    No fix
                                    Line 83
                                    Line 86
                                    Line 51
                                    No fix
                                    Line 83
                                    Line 86
                                    Line 51
                                    No fix

                                    Just to triple check, I updated it again back to 1.17.3.b1 and it still doesn't repeat the code as it does on 1.11.0.b1
                                    Terminal after 10mins of running:
                                    Line 51
                                    No fix
                                    Line 83
                                    Line 86

                                    I can't think of anything that might be going wrong, its a bit beyond me, but I'm pretty sure it's not a me thing if the only thing I've changed is the firmware.
                                    Feel free to get me to try any tests you need me to run.

                                    J 1 Reply Last reply Reply Quote 0
                                    • J Offline
                                      jcaron @Dylan
                                      last edited by

                                      @dylan time.sleep is not deep sleep. It will just wait for the given time and then resume execution after that instruction (where deep sleep on the other hand restarts the module on wake up).

                                      So unless you add a loop, it will just finish execution.

                                      What you want is probably machine.deepsleep.

                                      NB: to correctly format your code in posts, add ``` on a line before and after your code.

                                      D 1 Reply Last reply Reply Quote 0
                                      • D Offline
                                        Dylan @jcaron
                                        last edited by

                                        @jcaron This problems occurs with both the time.sleep and deepsleep commands. I've used both commands with this exact code below and had the same problem no matter which sleep function I am using.

                                        J 1 Reply Last reply Reply Quote 0
                                        • J Offline
                                          jcaron @Dylan
                                          last edited by

                                          @dylan Even though sub-optimal in this case, have you tried the Pytrack-controlled deep sleep?

                                          Also, if you're using deep sleep, you should save/restore the LoRa state (lora.nvram_save() before going to deep sleep, lora.nvram_restore() when starting), and avoid joining every time you start.

                                          Ah, with proper formatting I see you actually have a (weird) loop around the sleep. Can you add a trace after the time.sleep, as well as one after the end of the loop?

                                          D 1 Reply Last reply Reply Quote 0
                                          • D Offline
                                            Dylan @jcaron
                                            last edited by

                                            @jcaron I just added a Print("Line 88") after the timer to check it. While on firmware 1.11.0.b1 it prints after the 10 second wait then goes back to the Line 51 straight away (as expected). On 1.17.3.b1 it does not print anything after the sleep function and just never wakes up. And feel free to give any tips on the loop, as you can tell its a bit rough.

                                            I'll give that lora.nvram_save a look, sounds like a good idea cheers.

                                            L 1 Reply Last reply Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 2 / 2
                                            • First post
                                              Last post

                                            Pycom on Twitter

                                            Pycom