nvram lopy Errno 100

[han]

Hello @jcaron
This is my code.

# LoRaWAN (ABP)
from network import LoRa
from mqtt import MQTTClient
import socket
import binascii
import struct
import time
from deepsleep import DeepSleep

import ujson

import gc

from pysense import Pysense
from SI7006A20 import SI7006A20
from LTR329ALS01 import LTR329ALS01
from MPL3115A2 import MPL3115A2,ALTITUDE,PRESSURE

py = Pysense()
mp = MPL3115A2(py,mode=ALTITUDE)
mpp = MPL3115A2(py,mode=PRESSURE) # Returns height in meters. Mode may also be set to PRESSURE, returning a value in Pascals
si = SI7006A20(py)
lt = LTR329ALS01(py)
ds = DeepSleep()

gc.enable()

# Initialize LoRa in LORAWAN mode.
lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)

# create an ABP authentication params
dev_addr = struct.unpack(">l", binascii.unhexlify('xxxxxx'.replace(' ','')))[0]
nwk_swkey = binascii.unhexlify('xxxxxxx'.replace(' ',''))
app_swkey = binascii.unhexlify('xxxxxxx'.replace(' ',''))

# join a network using ABP (Activation By Personalization)
lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey))
print('Joined LoRa network')

# wait until the module has joined the network
while not lora.has_joined():
    time.sleep(2.5)
    print('Not joined yet...')

# remove all the non-default channels
for i in range(3, 16):
    lora.remove_channel(i)

# create a LoRa socket
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)

# set the LoRaWAN data rate
s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)
lora.nvram_restore()

# make the socket blocking
# (waits for the data to be sent and for the 2 receive windows to expire)
s.setblocking(True)

time.sleep(5)

for i in range (200):
    mqData = {}
    gc.collect()
    mqData ["data"] = {}
    mqData ["data"]["Temperature"] = mp.temperature()
    mqData ["data"]["Pressure"] = (mpp.pressure()/100)
    mqData ["data"]["Relative Humidity"] = si.humidity()
    mqData ["data"]["Battery voltage"] = py.read_battery_voltage()
    enc = ujson.dumps(mqData)
    gc.collect()
    s.send(enc)
    print('STA node sending packet ...')
    time.sleep(5)
    nvram_save()
    print("ready to DeepSleep")
    time.sleep(1)
    print("Going to DeepSleep")
    py.setup_sleep(15*60)
    py.go_to_sleep()

code

[robert-hh]

@han if you enclose your code in line with three backticks (```), the structure is maintained.

[han]

@robert-hh Thanks for the tip. I will do it the next time when I have to upload a piece of code.

[jcaron]

@han not sure about ABP but for OTAA you definitely don’t join every time. You should just do nvram_restore() just after you create the lora object, and only join if has.joined() returns false.

[robert-hh]

@jcaron As far as I could see it, there is no actual communication done for ABP join. Just the device ID and the respective keys are set in the MAC layer.
Either way, nvram_save() and nvram_restore() should be used to ensure the monotonic increase of the packet counters.

[han]

@jcaron
What do I have to do to make it work?

If I deleted the deepsleep part it work fine, but with the deepsleep the LoPy will not join again.

[jcaron]

@han As I said, move the lora.nvram_restore() just after creating of the loraobject, then test if lora.has_joined() and only do the join and probably the channel stuff if it has not joined yet.

[han]

@jcaron did you find anything strange in my code?

[han]

@jcaron
as I understood your tips.
Then should it be something like this. Right?

# LoRaWAN (ABP)

from network import LoRa
import socket
import binascii
import struct
import time
import pycom
from deepsleep import DeepSleep

import ujson

import gc

from pysense import Pysense
from SI7006A20 import SI7006A20
from LTR329ALS01 import LTR329ALS01
from MPL3115A2 import MPL3115A2,ALTITUDE,PRESSURE

py = Pysense()
mp = MPL3115A2(py,mode=ALTITUDE)
mpp = MPL3115A2(py,mode=PRESSURE)
si = SI7006A20(py)
lt = LTR329ALS01(py)
ds = DeepSleep()

gc.enable()

loraSaved = pycom.nvs_get('loraSaved')

if not loraSaved:
    # Initialize LoRa in LORAWAN mode.
    lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)

    # create an ABP authentication params
    dev_addr = struct.unpack(">l", binascii.unhexlify('14 20 36 XX'.replace(' ','')))[0]
    nwk_swkey = binascii.unhexlify('d0 ad 96 bb 95 0c b1 72 6a a4 3f 85 2f 4a XX XX'.replace(' ',''))
    app_swkey = binascii.unhexlify('d5 ac 3b 1c 70 6c f8 2a 46 f2 2f eb 57 12 XX XX'.replace(' ',''))

    # join a network using ABP (Activation By Personalization)
    lora.join(activation=LoRa.ABP, auth=(dev_addr, nwk_swkey, app_swkey))
    print('Joining the LoRa network')

    # wait until the module has joined the network
    while not lora.has_joined():
        time.sleep(2.5)
        print('Not joined yet...')
        machine.idle()

    # create a LoRa socket
    s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)

    # set the LoRaWAN data rate
    s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)

    # make the socket blocking
    s.setblocking(False)

    time.sleep(5)

    s.send('LoRa Saved')
    print("LoRa saved")

    time.sleep(5)
    lora.nvram_save()
    pycom.nvs_set('loraSaved', 1)

    time.sleep(5)

else:
    lora = LoRa(mode=LoRa.LORAWAN)
    lora.nvram_restore()

    s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)

    s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)

    s.setblocking(False)
    mqData = {}
    gc.collect()
    mqData ["m"] = {}
    mqData ["m"]["T"] = mp.temperature()
    mpp = MPL3115A2(py,mode=PRESSURE)
    mqData ["m"]["P"] = (mpp.pressure()/100)
    mqData ["m"]["H"] = si.humidity()
    mqData ["m"]["B"] = py.read_battery_voltage()
    enc = ujson.dumps(mqData)
    gc.collect()
    s.send(enc)
    pycom.nvs_set('loraSaved', 0) # reset for next test
    print('STA node sending packet ...')
    print(enc)
    print('LoRa data saved')
    time.sleep(5)
    print("Going to DeepSleep")
    ds.enable_pullups('P17')  # can also do ds.enable_pullups(['P17', 'P18'])
    ds.enable_wake_on_fall('P17') # can also do ds.enable_wake_on_fall(['P17', 'P18'])
    ds.go_to_sleep(30*60)  # go to sleep for 15 minutes

# get any data received...
data = s.recv(64)
print(data)

I still have the errno 100 error code. This time on rule 89.

[ferfersan6]

Hey! Did you solve it? I am having the same problem... Can't fix it. Thanks!