FTP
-
I cannot connect to my LoPy with FTP in passive mode. It just hangs. I have however been flashing both over serial with the Atom PyMakr plugin and over Wifi with the PyBytes web console. Do I need to set the device up as an access point first to use FTP?
-
@jmarcelino you seem to be the expert :-)
-
@brady-aiello The device is working as AP by default. You may have to activate it once with
import pycom
pycom.wifi_on_boot(True) -
@robert-hh Thank you! I found out that it was using a different FTP address (192.168.4.69 instead of 192.168.4.1) and I don't know how to change it. It seems to not care about the pymakr.conf file.
-
@brady-aiello You have to change it on the xxPy device. I usuall switch to station mode in my boot.py script and connect the xxPy device to my home AP.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login