TX/RX only console upgrade (Pymark) does not work with V1.9 firmware?
-
I designed lot of custom boards to handle lopy's for customers. On each board to be able to update and get control, I added a classic FTDI 6 pins connector.
As you can see schematics below can't be simpler
Everything is working fine, when on atom + pymakr can upload code without any problem with safe-boot or not activated.
But this is working only for firmware 1.8 I tried several time to use with firmware 1.9 and I see my soft output on pymark console (the print I do on my code), but each time I'm trying an upload, it stuck, it reset the device then block, no file are updated or whatever and I need to reset the device with reset button.
I tried with Lopy and Lopy4 same effect.Did I missed something ? It's really anoying because I need to stay in V1.8 since my devices are on field with customers. And not being able to update firmware remotely with them when doing tests is a real issue.
Here are some screenshot of the issue with V1.19
And with version V1.8 all is fine
-
This issue is discussed on GitHub here
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login