STM LoRa Discovery to LoPy nano gateway
-
We have set up a LoRa gateway using the LoPy module connected to TTN server. For testing, communication from another LoPy acting as end device to LoPy gateway works perfectly and we can receive all the data on the TTN server. However, we would like to use it as a permanent GW for our experiments so that we can connect other LoRa devices, apart from LoPy.
So we started with STM LoRa discovery kit as an ED. Configured the connection parameters for connecting to the GW. Although we can see the data packets been received by the GW, nothing is seen on the TTN server. Are we missing something in terms of configuration or data formatting that is prohibiting LoPy GW to correctly forward the data from STM to TTN?
Does the example provide for the GW is generic and can work with other LoRa devices?Any suggestions or directions will be welcome.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login