Does too much code and libraries uploaded lead to main.py not launching ?
-
This post is deleted! -
Hey there,
Im pretty sure the board being full isnt the issue here. Just to clarify you mention it doesnt work when connected to a pc, does this mean it works when powered via battery?
Paul
-
@brossingo That depends on which board you use and how much memory each module needs. But looking at your screen shot, memory shortage is not likely the case, as @Paul-Thornton said.
As a rule of thumb: unless your code allocates huge data structures, you can expect 10 lines of code/kByte to work fine. On a WiPy2 or LoPy1 this is about 500 lines of code, on all other boards it is about 25000. About twice that number if you pre-compile the code.
-
Try to cross compile the lib folder.
It may be a memory fragmentation problem, so you cannot allocate the needed buffer size.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login