Trouble uploading to FiPy
-
Hello, I'm having a problem uploading to my FiPy,
This is the last message I received after trying a hard reset:
rst:0x7 (TG0WDT_SYS_RESET),boot:0x16 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff9028,len:8
���x��xx�xxf�x��f������x������x���x��f������������x~f�������怘����x���x��f������x怘�f����f�����f���Traceback (most recent call last):
File "main.py", line 4, in <module>
ImportError: no module named 'LIS2HH12'But most of the time I get this message:
Uploading project (main folder)...
Safe booting device... (see settings for more info)
Safe boot failed, uploading anyway.
Upload failed.: timeout Please reboot your device manually.Would be very grateful for any help you could give. The board is brand new so the firmware should be up to date
-
I had the same problem for FiPy but not sure if it is the same reason. But for my case after I updated the firmware for the FiPy it works normally now. Try it.
Download the firmware update tool from the link below
https://docs.pycom.io/gettingstarted/installation/firmwaretool.html#firstPlease be aware that the firmware for the FiPy is different the firmware for the Pysense.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login