Need Help to connect NB-IOT 1nce / Germany

[svonbentzel]

Hello togehther, I need help.

I have multiple FiPy Boards with and without expansion board try´d.

I have used two 1nce SIM-Cards. The cards working good. and its a NB-IOT Contract.
FiPy Rev. 1.2 RMA from Pycom
Modem Firmware is already updated to DUP NB1-41019
LTE-Antenna is connected
SIM-Card is correctly plugged in.

i have try multiple NB-IOT connection Scripts. no ones run.
i have running the script multiple hours inside and outside of the House.

any Ideas and Hints?

Sysname: FiPy
Release: 1.18.2.r3
Version: v1.8.6-849-a1641ca on 2019-02-28
Machine: FiPy with ESP32
Query LTE modem imei... 35434**********
Query SIM iccid... 89882***************
Sent to modem: 'ATI1', delay 1000 ms
UE6.0.0.0
LR6.0.0.0-41019
OK
Sent to modem: 'AT!="showver"', delay 1000 ms
SYSTEM VERSION
==============
  FIRMWARE VERSION
    Bootloader0  : 5.1.1.0 [39529]
    Bootloader1* : 6.0.0.0 [41019]
    Bootloader2  : NA
    NV Info      : 1.1,0,0
    Software     : 6.0.0.0 [41019] by robot-soft at 2018-12-13 21:41:15
    UE           : 6.0.0.0
  COMPONENTS
    ZSP0         : 1.0.99-3171
    ZSP1         : 1.0.98-3170
OK
Sent to modem: 'AT!="RRC:setDbgPerm full"', delay 1000 ms
OK
Sent to modem: 'AT!="RRC:showcaps"', delay 1000 ms
== CAPS config =============================
  .Lock UE on SRV band    : false
  .MFBI support           : true
  .TM8 TDD support        : false
============================================
== CAPS ====================================
  . access stratum: R13
  . catM          : 1
  . nb-IoT        : 1
-- EUTRA bands --
  . supported     : 66/28/26/25/20/19/18/17/14/13/12/8/5/4/3/2/1
  . board         : 1/2/3/4/5/8/12/13/14/17/18/19/20/25/26/28/66
  . admin         :
  . pending admin :
-- EUTRA carriers --
  . admin         :
  . pending admin :
============================================
OK```

[v2h]

This post is deleted!

[robert-hh]

@svonbentzel The first script is the one I uss too for testing and it works. Only I have a different firmware version:
Pycom MicroPython 1.20.0.rc10 [3911a85-dirty] on 2019-04-17; FiPy with ESP32
Edit: updated to:
Pycom MicroPython 1.20.0.rc11 [55accd1-dirty] on 2019-05-24; FiPy with ESP32, same good state.

[svonbentzel]

@Elizar Hello, Yes I think ;)

from network import LTE
import time

lte = LTE()
lte.attach(band=8, apn="iot.1nce.net")
while not lte.isattached():
    time.sleep(0.5)
    print(".", end="")

print("\nAttached!")

print(lte.send_at_cmd("AT+CSQ"))

lte.connect()       # start a data session and obtain an IP address
while not lte.isconnected():
    time.sleep(0.5)
    print("-", end="")

print("Connected!")

Second Script:

import os
from network import LTE
import usocket
import time


def send_at_cmd_pretty(cmd, delay=1000):
    response = lte.send_at_cmd(cmd, delay=delay).split('\r\n')
    print('Sent to modem: \'{}\', delay {} ms'.format(cmd, delay))
    for line in response:
        if line.strip() != '':
            print(line)


# Print module details
un = os.uname()
print('Sysname:', un.sysname)
print('Release:', un.release)
print('Version:', un.version)
print('Machine:', un.machine)

# Initialize LTE object
lte = LTE()
time.sleep(5)

# Pre attaching debugging
print('Query LTE modem imei...', lte.imei()[:5] + '*' * 10)
print('Query SIM iccid...', lte.iccid()[:5] + '*' * 15)
send_at_cmd_pretty('ATI1')
send_at_cmd_pretty('AT!="showver"')
send_at_cmd_pretty('AT!="RRC:setDbgPerm full"')
send_at_cmd_pretty('AT!="RRC:showcaps"')
time.sleep(5)
send_at_cmd_pretty('AT+SQNCTM?')

# Attach LTE
print('LTE attaching...')
lte.attach(band=8, apn="iot.1nce.net")
attempts = 0
while not lte.isattached():
    time.sleep(5)
    attempts = attempts + 1
    print('Attaching...', attempts)
    if attempts % 15 == 0:
        send_at_cmd_pretty('AT+SQNMONI=9')
        send_at_cmd_pretty('AT+CEREG?')
        send_at_cmd_pretty('AT+CFUN?')
        send_at_cmd_pretty('AT+CSQ')
        send_at_cmd_pretty('AT!="showphy"')
        send_at_cmd_pretty('AT!="fsm"')
print('LTE attach succeeded!')

# Debug attached state
send_at_cmd_pretty('AT+CEREG?')
send_at_cmd_pretty('AT+SQNMONI=9')
send_at_cmd_pretty('AT+CSQ')
send_at_cmd_pretty('AT!="showphy"')
send_at_cmd_pretty('AT!="fsm"')
send_at_cmd_pretty('AT+CGPADDR')
send_at_cmd_pretty('AT+PING="8.8.8.8"', delay=5000)

# Connect LTE
lte.connect()
attempts = 0
while not lte.isconnected():
    time.sleep(5)
    attempts = attempts + 1
    print('Connecting...', attempts)
print('LTE connection succeeded!')

# Test DNS
try:
    usocket.dnsserver(0, '8.8.8.8')
    usocket.dnsserver(1, '1.1.1.1')
    usocket.dnsserver()
    print(usocket.getaddrinfo('www.google.com', 80)[0][-1])
except Exception:
    print('DNS over NB-IoT failed...')



# Shutdown LTE
print("Disonnecting LTE ... ")
lte.disconnect()
print("Detaching LTE ... ")
lte.dettach()
print("Shuttting down LTE...")
lte.deinit()

[Elizar]

@svonbentzel Did you setup the AP?
Something like 'AT+CGDCONT=1,"IP","internet.nbiot.telekom.de"' ?