How to Find Port Number to connect to WiFi Network using socket.connect(). OSError: [Errno 104] ECONNRESET

[jc_serg]

Using a WiPy 3.0 and Expansion board, I am looking to connect to Wifi Networks using WLAN() and calculate the ping between the WiPy and the network using Socket. I can connect to Wifi just fine, but when opening a socket to connect to the network I get the error OSError: [Errno 104] ECONNRESET after socket.connect() is run. I believe it is because I am using the wrong port number, but I don't know how to find the correct port between the two. Does anyone know how to find the right port number, or know of a better way to ping the network.

Here is my code:

from network import WLAN
import time
import socket
import ssl
import machine

wlan = WLAN(mode=WLAN.STA)

#Scan networks
networks = wlan.scan()
for network in networks:
	if network.ssid=='WIFI NAME':
		print('Wifi found...')
		wlan.connect(ssid=network.ssid, auth=(network.sec, 'WIFI PASSWORD),timeout=500)
		while not wlan.isconnected():
			machine.idle()
if wlan.isconnected():
	print('WLAN Connected!')

config = wlan.ifconfig()
ip = config[0]
port = 80
addinfo = socket.getaddrinfo( ip , port)[0][-1]

print('Preparing Socket...')
s = socket.socket() #Prepare socket
#s.setblocking(False)
#s = ssl.wrap_socket(s)

print('Opening Socket...')
start = time.ticks_ms() #Start Time
try:
    s.connect(addinfo) #ERROR THROWN HERE OSError: [Errno 104] ECONNRESET
except OSError as e:
    if str(e) == '199':
        print("In Progress")
    else:
        raise e

rec = s.recv(1024)
s.close()
elapsedTime = time.ticks_diff(start,time.ticks_ms()) #calculate elapsedTime``= ping

[robert-hh]

@jc_serg If you are looking for a ping.py script: there is one here: https://gist.github.com/91cc8979e33e82af6d99ec34c38195fb.git