-
I have a hard time mapping the P numbers of the LoPy to the G numbers on the expansion board. The LoPy pinout sheet (PDF) only talks about the P numbers, but there seems to be no mentioning about the G numbers (or I am blind). Where can I find a mapping between these two different pin numbering schemes?
-
This should help you (made from LoPy and EB pinout sheets'):
LED/USB RST 5V P0 - G2 GND P1 - G1 3,3V P2 - G23 P23 - G10 P3 - G24 P22 - G9 P4 - G11 P21 - G8 CLK - G12 P20 - G7 MOSI - G13 P19 - G6 MISO - G14 P18 - G30 P8 - G15 P17 - G31 P9 - G16 P16 - G3 P10 - G17 P15 - G0 P11 - G22 P14 - G4 P12 - G28 P13 - G5Also read this https://forum.pycom.io/topic/242/expansion-board-pin-numbers-vs-lopy-pin-numbers/5
-
@rskoniec Great! Thanks a lot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login