PyGate as LoRa node
-
Hi,
I´m quite a beginner with the Pycom products and wonder if there is a possibility to missuse the Pygate as a LoRaWan node (TTN end device)?
THX
-
Hello,
The Pygate itself has no computing capabilities. It needs to be attached to a Development Module, LoPy for example. If you attach a LoPy to the Pygate, you can of course configure the LoPy as a LoRaWan node. In that case you would not be using the Pygate as a LoRa gateway, instead you would be using it as a shield just like an Expansion Board.
Thanks.
-
@Yusuf-BAYLAV let’s note for clarification that the Pygate version of the firmware of the LoPY or FiPy does not include support for LoRa end-device operations. So one would need to use the “regular” version of the firmware with no support for the Pygate.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login