fipy not working with 2.0 X boards
-
My fipy runs without any problems on the Expansion board and on the Pyscan board. However, I can NOT get it running on Pysense 2.0 X and Pytrack 2.0 X boards. No heartbeat LED, no serial connection possible. Any idea what is wrong here?
-
@Thomas-Barkowsky Did you double check the orientation is correct? Also how are you powering the combo? Are the Pysense/Pytrack visible as USB devices and/or serial ports even without the module?
-
Thanks for your request. Orientation definitely is correct. Device is connected through USB, however also with battery there is no LED heart beat.
lsusb shows the device as follows:
Bus 004 Device 103: ID 04d8:f012 Microchip Technology, Inc. Pysense
dmesg yields:
[43506.884788] usb 4-2: new full-speed USB device number 103 using xhci_hcd
[43507.066441] usb 4-2: New USB device found, idVendor=04d8, idProduct=f012, bcdDevice= 0.10
[43507.066454] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[43507.066459] usb 4-2: Product: Pysense
[43507.066462] usb 4-2: Manufacturer: Pycom
[43507.066465] usb 4-2: SerialNumber: Py52bbd3
[43507.080402] cdc_acm 4-2:1.0: ttyACM0: USB ACM device -
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login