Alex's Corner - Week 3 - LoPy LoRaWAN Nano-Gateway & TTN

[PiAir]

BTW, I just noticed that the LoPy Nano Gateway and node support downlink information....nice. :)
(now I just have to add some code on the client to actually do something with it and a payload function to do the encoding on the TTN side, see if only the TTN backbone works then testing is much more interesting).

pfff....until I get another upvote I am only allowed one post per 600 seconds...

While I was waiting to post, I had another look at the abp_node.py code in the examples folder:

for i in range (200):
s.send(b'PKT #' + bytes([i]))
time.sleep(4)
rx = s.recv(256)
if rx:
print(rx)
time.sleep(6)

It might be worthwhile to explain somewhere that this node example script sends 200 packages and then stops.
Now, resetting will restart the node, but because the devices on TTN by default do "Frame Counter Checks", the backend will ignore the packages after the reset because the node will start at 1 again and the backend will see them as duplicates.
You can reset the frames counter for the device to fix this.

[gerkez]

@PiAir
Hi Pierre,
Thanks for your replies. I appreciate it a lot.
Who could have guessed that the ttn network / router was down?
Waited until today, have the same config as you described and guess what?
Today everything works. I'm happy, because now I have a gateway I can connect to without having to leave my house :-)
Thanks again.

[PiAir]

I combined a couple of my tests / results of this weekend in another blog post titled "LoRaWAN + The Things Network = Still some love left". Which shows that this weekend was better than last week when I wrote "LoRaWAN + The Things Network = Tough Love or No Love ?" ;-)

[rskoniec]

@daniel said in New firmware release 1.6.7.b1 (LoRaWAN Nano Gateway with TTN example!!):

@rskoniec I'm also seeing those and I'm investigating the cause together with Espressif.

@rskoniec said in New firmware release 1.6.7.b1 (LoRaWAN Nano Gateway with TTN example!!):

Sometimes I see series of W (xxxxxxxxx) wifi: post pm rx bcn failed messages on my LoRaWAN Nano Gateway:

Push ack
Push ack
Push ack
W (147750288) wifi: post pm rx bcn failed
W (147750288) wifi: post pm rx bcn failed
Pull ack
Pull ack
Pull ack

With the newest f/w 1.6.10.b1 I'm still seeing these messages. @daniel Any news from Espressif?

[Peter Lans]

Thank you Alex and all the people here on the forum.
Thanks to all the information provided here I managed to connect my Lopy as nano gateway to TTN. The frontpage detected it although my console tells me it is not connected. I guess that will be fixed at some point in time too.
But the data is coming through from de OTAA node, so I guess it works. It has to, because my Lopy is the only gateway around.

As I am completely new to lora, micropython and microprocessor programming, it is an exiting journey for me. But from here, I do have a great starting point to move on.

Kind regards,
Peter Lans

[jmarcelino]

@Peter-Lans
TTN is saying the gateway "not connected" and other issues should be fixed early next week.

https://www.thethingsnetwork.org/forum/t/known-issue-gateways-show-as-not-connected-in-the-console/6527

[bucknall]

I've gotten around to pushing up the LoPy LoRaWAN Nano-Gateway Tutorial!

Check it out here - https://docs.pycom.io/pycom_esp32/pycom_esp32/tutorial/includes/lorawan-nano-gateway.html

[palmy-nz]

Hi Alex, thanks for these videos.

I managed to get the nano-gateway working, using the Packet Forwarder protocol and finding out my Device EUI with these commands

import network
import binascii
binascii.hexlify(network.LoRa().mac())

However, I could not get the node working with the otaa_node.py example. I am getting this error:

ValueError: invalid argument(s) value

On this line

lora.add_channel(0, frequency=915100000, dr_min=0, dr_max=5)

Note I am on the 915 frequency (New Zealand). Has to be something to do with that aye?

Any advice appreciated.

Ps. I would love to see in an upcoming video how to pull data from sensors, and also push to nodes e.g. trigger led/servo.

[jmarcelino]

@palmy-nz
For the 915Mhz region the dr_max parameter (LoRa datarate setting) has to be 4 and not 5.

You'll also need to change the nano gateway script to match the frequencies and channel, please see this thread https://forum.pycom.io/topic/983/otaa_node-py-error/3

[bucknall]

Hi @palmy-nz please try the settings that @jmarcelino suggested and let me know how you get on. If this fails, I have another idea of what might have been the issue!

Data acquisition is definitely an interesting topic! I'll make sure it's on the list for Alex's Corner!

Cheers,

Alex

[palmy-nz]

Thanks @jmarcelino @bucknall

Changing the dr_max from 5 to 4 (for 915mhz) did fix this ValueError.

Now I am just getting Not joined yet

My gateway config.py looks like this

GATEWAY_ID = '70b3d54990c648be'

SERVER = 'router.au.thethings.network'
PORT = 1700

NTP = "pool.ntp.org"
NTP_PERIOD_S = 3600

WIFI_SSID = '***'
WIFI_PASS = '***'

LORA_FREQUENCY = 915100000
LORA_DR = "SF7BW125"   # DR_5

Anything glaringly obvious?

[bucknall]

@palmy-nz looks fine :) - have you set up an application on the TTN yet?

[palmy-nz]

@bucknall I do, but device status still 'never seen'.

My device eui, app eui, and app key all match node main.py (from otaa_node.py)

Not sure about the application handler, currently set to ttn-handler-us-west? no au (aussie) option

Where could I be looking?

[jmarcelino]

@palmy-nz
Did you change your nanogateway.py line 41 as in that thread I linked?

Where it says "freq": 868.1 should be "freq": 915.1

Then in your otaa_node.py remove all 3 lora.add_channel() lines and replace with

for channel in range(0, 72):
    lora.remove_channel(channel)

lora.add_channel(0, frequency=915100000, dr_min=0, dr_max=4)

This is necessary for 915Mhz regions

[palmy-nz]

@jmarcelino i had missed that change.

I have now changed the freq: and added the remove channel loop.

But still getting Not joined yet.

I tried changing s.setsockopt(socket.SOL_LORA, socket.SO_DR, 4) value, without any luck.

Here are my files...
Node - main py
NanoGateway nanogateway py
NanoGateway config py

[avinash]

@palmy-nz Did you get a chance to complete this?

I was able to connect my nano gateway to TTN, but te node is still getting "Not joined yet".
I'm using 868100000 frequency.

[jclo13]

@jmarcelino can you help me please?

I was able to connect my NanoGateway to TTN, then I connected a node and i no had problems, however, now I am having problems to connect the node, when I start the node the following messages appear in the NanoGateway:

[ 884.453] Received packet: {"rxpk": [{"data": "ABeYANB+1bNwQfHGnEnVs3BtML tNbMI=", "time": "2018-02-14T15:38:34.160580Z", "chan": 0, "tmst": 860755474, "s tat": 1, "modu": "LORA", "lsnr": 5.0, "rssi": -20, "rfch": 0, "codr": "4/5", "fr eq": 903.9001, "datr": "SF7BW125", "size": 23}]}
[ 884.710] Push ack
[ 887.718] Pull ack
[ 889.710] Pull rsp
[ 890.633] Sent downlink packet scheduled on 866.755, at 923.299 Mhz using SF12BW500: b' yZ\xe2\xb8 \x 191\xc3NL\xc7/\xba+\xf4\xc4'

but the node is still getting "not joined yet", I am using the 915 Mhz.