@Renate-Chaplin I'm on the West Coast and I think somewhere near the bay area would be good.

@brady-aiello it's definitely on Monday 16th September and the address is here: International Hotel Center 868 Kearny Street San Francisco, CA 94108 Link to the Event

@bmarkus I know it's a year out...however, this year we'll be there, join us? Hall 3A / 3A-533 :-)

Hi All, The TTN Conf was a blast. Pymesh (Mesh over LoRa) was presented, in a pre-release shape, even more we had a ~30ppl workshop, which was full-house. Technically, the most interesting thing, was presentation of LoRaWAN extender (Relay) idea, which Nicolas Sornin (LoRa inventor/Semtech CTO) would like to add to LoRaWAN standard pretty soon. This goes hand-in-hand with our Pymesh development efforts. I was lucky to have a private meeting with Nicolas, in which we debated the Pymesh. Furthermore, in this workshop, he presented some tech ideas that I'll incorporate in Pymesh LoRa physical layer. As general note, lots of business people were interested in using Pymesh and Pygo for real use-cases. Now-days, my efforts go into integrating Pymesh into our master development, so to be released ASAP. Also, more micropy scripts should be released to exemplify Pymesh usage.

Hi Paul, thanks for the info. It is great, I will visit the booth. Regards, Béla

@jmarcelino can you help me please? I was able to connect my NanoGateway to TTN, then I connected a node and i no had problems, however, now I am having problems to connect the node, when I start the node the following messages appear in the NanoGateway: [ 884.453] Received packet: {"rxpk": [{"data": "ABeYANB+1bNwQfHGnEnVs3BtML tNbMI=", "time": "2018-02-14T15:38:34.160580Z", "chan": 0, "tmst": 860755474, "s tat": 1, "modu": "LORA", "lsnr": 5.0, "rssi": -20, "rfch": 0, "codr": "4/5", "fr eq": 903.9001, "datr": "SF7BW125", "size": 23}]} [ 884.710] Push ack [ 887.718] Pull ack [ 889.710] Pull rsp [ 890.633] Sent downlink packet scheduled on 866.755, at 923.299 Mhz using SF12BW500: b' yZ\xe2\xb8 \x 191\xc3NL\xc7/\xba+\xf4\xc4' but the node is still getting "not joined yet", I am using the 915 Mhz.

@bucknall I have watched the webinar and still have some problems with understanding how to send data between two Lopys. Should both of them be connected to a computer? If so do I need to use two computers to do that? How can I send the data without connecting Lopys to computer? I believe these are very easy questions but i am a begginer here...

@Jiemde This is correct! They use the same sleep method as the deep sleep shield to control the devices sleep. I.e. setup_sleep() + go_to_sleep().

I personally hate it when people cancel last minute for an event, been in that position as organizer more than once, but I simply have to make some calendar choices for this Saturday. It is one of those “busy parents with busy children and full schedules” kind of things. So I won't be seeing all of you in Eindhoven. Sorry guys :(

@PiAir Thanks for the link, I will check it out.

@bucknall Any chance of Resin on the Wipy? https://resinos.io/ There is now a Home-assistant install using resin described here https://community.home-assistant.io/t/introducing-hass-io/17296

@bucknall just posted about sending images over MQTT, perhaps one for another Corner?

Hi @michal.zykov! Unfortunately not yet! I've still experimenting with the format but I will, starting next week, start summarizing the workshops on a git repo! I'll post here again on Monday! :)