Lopy P8 Pin is always HIGH
-
I'm a little bit frustrated about this.
p = Pin("P8", mode=Pin.OUT) p.value(0)The pin is always high.
According the LoPy pinout this pin is not reserved...
What I miss?
-
That was reported https://forum.pycom.io/topic/930/new-firmware-release-1-6-9-b1-frozen-code-support-and-framebuf/17 and fixed in the Github version https://github.com/pycom/pycom-micropython-sigfox/commit/195813d432d9f41314ef9923104b21db1282edf8
-
I upgraded the board to 1.6.10.b1 and it is ok.
But there is another behavior still running. P19 is delivering only 2.65V on High... And I really need that pin....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login