GPy with Hologram.io SIM
-
-
As a first step maybe try:
lte.send_at_cmd('AT+CGDCONT=1,"IP","hologram"') lte.attach()to set the APN correctly
-
I've modified the program as recommended; still does not attach to the tower.
Hologram technical support has verified that the SIM should work with the GPy and CAT-M1 connecting to both Verizon and AT&T.
Any ideas of what I can do to troubleshoot further?
import pycom import socket import ssl import time from network import LTE def send_at_cmd_pretty(cmd): response = lte.send_at_cmd(cmd).split('\r\n') for line in response: print(line) print("CAT M1 Test - V0.1") pycom.heartbeat(False) lte = LTE() # instantiate the LTE object send_at_cmd_pretty('AT+CGDCONT=1,"IP","hologram"') lte.attach() # attach the cellular modem to a base station i = 0 while not lte.isattached(): i = i + 1 print("not attached: {}".format(i)) if (i % 2 == 0): pycom.rgbled(0xFF0000) # Red else: pycom.rgbled(0x000000) # off time.sleep(0.25) lte.connect() # start a data session and obtain an IP address i = 0 while not lte.isconnected(): i = i + 1 print("not connected: {}".format(i)) if (i % 2 == 0): pycom.rgbled(0x00FF00) # Green else: pycom.rgbled(0x000000) # off time.sleep(0.25) pycom.rgbled(0x0000FF) # Blue s = socket.socket() s = ssl.wrap_socket(s) s.connect(socket.getaddrinfo('www.google.com', 443)[0][-1]) s.send(b"GET / HTTP/1.0\r\n\r\n") print(s.recv(4096)) s.close() lte.disconnect() lte.dettach() pycom.rgbled(0x000000) # off -
@tlanier
I'm really not sure about Hologram with our modules in the US, but lets do the basic checks first:- Have you connected the LTE antenna to the correct port - for the GPy should be next to LED
- Have you waited enough time? - sometimes it can take up to 45 seconds to attach
- Maybe reception isn't very good in your area - Cat M1 coverage is still limited. Try elsewhere or ideally outside.
-
Hologram tech support indicates that their SIM card should work with Verizon and AT&T with your GPy device. They've indicated that they have a GPy and will try the test at their site.
Yes, the LTE antenna is connected to the correct port.
Yes, I've waited many minutes at 3 indoor locations (work and home) and 1 outdoor location with no successful attach to tower.
A cell phone shows the Verizon signal strength to be 3 bars.
Any other ideas of what I can try?
Are there any modem commands that would help understand what is taking place?
-
Hey Jose,
I've been testing it on a GPy, FiPy I have here. Is there an exhaustive list of the AT command set available anywhere? I'm also tracking my progress of troubleshooting on our forum where @tlanier also posted: https://community.hologram.io/t/pycom-gpy/1664
-
Ok thanks @tlanier
Can you try replacing your LTE attach code with:
lte = LTE() send_at_cmd_pretty('AT+CPIN?') send_at_cmd_pretty('AT+CGDCONT=1,"IP","hologram"') send_at_cmd_pretty('AT+CFUN=0') send_at_cmd_pretty('AT+CEREG=2') send_at_cmd_pretty('AT!="clearscanconfig"') send_at_cmd_pretty('AT!="RRC::addscanfreq band=4 dl-earfcn=2175"') send_at_cmd_pretty('AT!="RRC::addscanfreq band=12 dl-earfcn=5095"') send_at_cmd_pretty('AT!="RRC::addscanfreq band=13 dl-earfcn=5230"') send_at_cmd_pretty('AT+CFUN=1') while not lte.isattached(): time.sleep(1) send_at_cmd_pretty('AT!="showphy"') send_at_cmd_pretty('AT!="fsm"') send_at_cmd_pretty('AT+CEREG?')This will produce a lot of debug output
-
Thanks @chrisgammell !
The only AT command guide we can publish is this: https://docs.pycom.io/chapter/datasheets/downloads/Monarch_4G-EZ_LR5110_ATCommands_ReferenceManual_Rev3_NOCONFIDENTIAL.pdf
But really that should be enough, Sequans doesn't share the special AT!= commands even with us other than to solve particular problems.
-
@jmarcelino said in GPy with Hologram.io SIM:
AT+CEREG?')
Here's mine:
DL SYNCHRO STATISTICS ===================== Synchro state : CELL SEARCH PPU SIB1 ACQ watchdog : 1 Frequency Hypothesis RF (Hz) : -4000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -22.71 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 52.76 RX PSD BO (dBFs) : -21.92 RX PSD (dBm) : -93.92 Noise level RS (dBm) : -123.92 Digital gain (dB) : 12.24 CINR RS (dB) : -9.76 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : 0 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 573 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |SCANNING | | RRC SEARCH FSM |WAIT_CELL_ID | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NORM_WAITCELL | | EMM MAIN FSM |REGISTERED | | EMM AUTH FSM |KASME_DEFINED | | EMM CONN FSM |EMM_IDLE | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_ACTIVE | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |READY | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |IDLE | +--------------------------+--------------------+ OK +CEREG: 2,4 OK DL SYNCHRO STATISTICS ===================== Synchro state : CELL SEARCH PPU SIB1 ACQ watchdog : 1 Frequency Hypothesis RF (Hz) : -2000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -22.71 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 25.26 RX PSD BO (dBFs) : -21.92 RX PSD (dBm) : -93.92 Noise level RS (dBm) : -123.92 Digital gain (dB) : 4.74 CINR RS (dB) : -9.76 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : 0 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 573 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |SCANNING | | RRC SEARCH FSM |WAIT_CELL_ID | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NORM_WAITCELL | | EMM MAIN FSM |REGISTERED | | EMM AUTH FSM |KASME_DEFINED | | EMM CONN FSM |EMM_IDLE | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_ACTIVE | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |READY | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |IDLE | +--------------------------+--------------------+ OK +CEREG: 2,4 OK -
Also I'm still getting 99,99 for AT+CSQ
Yes, I double checked, the antenna is plugged into the correct ports :-D
@tlanier, did you check that command on yours?
-
Yes, I'm also getting +CSQ: 99,99
-
Thanks @chrisgammell
Can you try this instead please:
send_at_cmd_pretty('AT+CFUN=0') send_at_cmd_pretty('AT+SQNCTM="verizon"') send_at_cmd_pretty('AT+CGDCONT=1,"IP","hologram"') send_at_cmd_pretty('AT+CEREG=2') send_at_cmd_pretty('AT+CFUN=1') send_at_cmd_pretty('AT!="showinit"') while not lte.isattached(): time.sleep(1) send_at_cmd_pretty('AT!="showphy"') send_at_cmd_pretty('AT!="fsm"') send_at_cmd_pretty('AT+CEREG?')The AT+SQNCTM="verizon"' setups up some other parameters for Verizon including scanning the correct bands. These should be reflected in the new debug command AT!="showinit" after CFUN=1
-
Notice the first command (AT+CPIN?) generates an error.
CAT M1 Test - V0.1 ERROR OK OK OK OK OK OK OK OK DL SYNCHRO STATISTICS ===================== Synchro state : OFF PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : 0 RSRP (dBm) : -21474836.00 RSRQ (dB) : -12.36 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 44.55 RX PSD BO (dBFs) : -21.15 RX PSD (dBm) : -85.50 Noise level RS (dBm) : -87.44 Digital gain (dB) : 6.48 CINR RS (dB) : 3.73 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : -359 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 1778 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |STOPPED | | RRC SEARCH FSM |NULL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NULL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |NULL | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+ OK +CEREG: 2,0 OK DL SYNCHRO STATISTICS ===================== Synchro state : OFF PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : 0 RSRP (dBm) : -21474836.00 RSRQ (dB) : -12.36 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 44.55 RX PSD BO (dBFs) : -21.15 RX PSD (dBm) : -85.50 Noise level RS (dBm) : -87.44 Digital gain (dB) : 6.48 CINR RS (dB) : 3.73 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : -359 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 1778 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |STOPPED | | RRC SEARCH FSM |NULL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NULL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |NULL | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+ OK +CEREG: 2,0 OK -
CAT M1 Test - V0.1 OK OK OK OK OK -- Scan options ------------------------------------------- | . Init Stored info use : true | . Init MRU freq use : true | . Init REG freq use : false | . Init FastScan use : true | . Init iterative band scan : false | . Init scan batch of freq : false | . Init hybrid 1 mode : false | . Init optim SIB rx : true | . Forced freq : false | . MRU cell use : true ----------------------------------------------------------- -- Scan Command config ---------------------------------------------------- | id | type | object | --------------------------------------------------------------------------- | 1 | BAND | (id:1) 4,13 | | 2 | DELAY | 5000 msec | | 3 | LOOP | jump to cmd:1, dur:5000ms | --------------------------------------------------------------------------- OK DL SYNCHRO STATISTICS ===================== Synchro state : IDLE PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : 0 RSRP (dBm) : -21474836.00 RSRQ (dB) : -12.79 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 44.55 RX PSD BO (dBFs) : -21.06 RX PSD (dBm) : -85.55 Noise level RS (dBm) : -86.52 Digital gain (dB) : 6.53 CINR RS (dB) : 2.09 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : -359 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 83 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |STOPPED | | RRC SEARCH FSM |NULL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NULL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |NULL | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+ OK +CEREG: 2,0 OK DL SYNCHRO STATISTICS ===================== Synchro state : IDLE PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : 0 RSRP (dBm) : -21474836.00 RSRQ (dB) : -12.79 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORT AGC AGC RX gain (dB) : 44.55 RX PSD BO (dBFs) : -21.06 RX PSD (dBm) : -85.55 Noise level RS (dBm) : -86.52 Digital gain (dB) : 6.53 CINR RS (dB) : 2.09 NARROWBANDS Last DL NB : Central Last UL NB : 0 AFC Frequency offset RF (Hz) : -359 Frequency offset BB (Hz) : 0 PBCH MIB received quantity : 83 MIB timeout quantity : 0 OK SYSTEM FSM ========== +--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |STOPPED | | RRC SEARCH FSM |NULL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |NULL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |NULL | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+ OK +CEREG: 2,0 -
@tlanier said in GPy with Hologram.io SIM:
RRC TOP FSM |STOPPED
Can you leave it for a minute or so please. You should see this changing to SCANNING but it's not immediate, it's done in cycles. Thanks.
-
Looks like mine just needed to cycle a few more times as well, just got this:
+CEREG: 2,5,"CC14","031D4803",7
-
That's great! 2,5 is what we want for Hologram (5 means attached as roaming)
So does the
while not lte.isattached():loop finish correctly then and move to the connection step - which means PPP is established?lte.connect() while not lte.isconnected(): time.sleep(1) print("Connected!") -
Mine has been running for about 10 minutes returning:
+CEREG: 2,0
My cell phone uses Verizon and it shows a strong 3 bar signal.
I'm going to try powering down and back up to see if that will help.
-
After power off/on I'm now getting +CEREG: 2,4
It never gets the 2,5 you mentioned after 10 mins.
DL SYNCHRO STATISTICS
Synchro state : MIB DETECT PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : -1000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -25.99 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORTAGC
AGC RX gain (dB) : 54.90
RX PSD BO (dBFs) : -21.71
RX PSD (dBm) : -95.99
Noise level RS (dBm) : -124.46
Digital gain (dB) : 6.62
CINR RS (dB) : -16.11
NARROWBANDS
Last DL NB : Central
Last UL NB : 0
AFC
Frequency offset RF (Hz) : 47
Frequency offset BB (Hz) : 0
PBCH
MIB received quantity : 1394
MIB timeout quantity : 0OK
SYSTEM FSM
+--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |SCANNING | | RRC SEARCH FSM |WAIT_CELL_ID | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |ANY_WAITCELL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |ABSENT | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+OK
+CEREG: 2,4
OK
DL SYNCHRO STATISTICS
Synchro state : CELL SEARCH PPU SIB1 ACQ watchdog : 0 Frequency Hypothesis RF (Hz) : -1000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -25.99 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORTAGC
AGC RX gain (dB) : 54.87
RX PSD BO (dBFs) : -21.44
RX PSD (dBm) : -96.46
Noise level RS (dBm) : -126.46
Digital gain (dB) : 10.13
CINR RS (dB) : -16.11
NARROWBANDS
Last DL NB : Central
Last UL NB : 0
AFC
Frequency offset RF (Hz) : 70
Frequency offset BB (Hz) : 0
PBCH
MIB received quantity : 1422
MIB timeout quantity : 0OK
SYSTEM FSM
+--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |SYNCING | | RRC SEARCH FSM |WAIT_SYNC | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |ANY_WAITCELL | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |ABSENT | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+OK
+CEREG: 2,4
OK
DL SYNCHRO STATISTICS
Synchro state : IDLE PPU SIB1 ACQ watchdog : 1 Frequency Hypothesis RF (Hz) : -1000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -25.99 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORTAGC
AGC RX gain (dB) : 54.87
RX PSD BO (dBFs) : -21.78
RX PSD (dBm) : -98.39
Noise level RS (dBm) : -126.46
Digital gain (dB) : 9.05
CINR RS (dB) : -16.11
NARROWBANDS
Last DL NB : Central
Last UL NB : 0
AFC
Frequency offset RF (Hz) : 43
Frequency offset BB (Hz) : 0
PBCH
MIB received quantity : 1429
MIB timeout quantity : 0OK
SYSTEM FSM
+--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |INITIAL | | RRC SEARCH FSM |INITIAL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |PARKING | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |ABSENT | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+OK
+CEREG: 2,4
OK
DL SYNCHRO STATISTICS
Synchro state : IDLE PPU SIB1 ACQ watchdog : 1 Frequency Hypothesis RF (Hz) : -1000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -25.99 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORTAGC
AGC RX gain (dB) : 54.87
RX PSD BO (dBFs) : -21.78
RX PSD (dBm) : -98.39
Noise level RS (dBm) : -126.46
Digital gain (dB) : 9.05
CINR RS (dB) : -16.11
NARROWBANDS
Last DL NB : Central
Last UL NB : 0
AFC
Frequency offset RF (Hz) : 43
Frequency offset BB (Hz) : 0
PBCH
MIB received quantity : 1429
MIB timeout quantity : 0OK
SYSTEM FSM
+--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |INITIAL | | RRC SEARCH FSM |INITIAL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |PARKING | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |ABSENT | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+OK
+CEREG: 2,4
OK
DL SYNCHRO STATISTICS
Synchro state : IDLE PPU SIB1 ACQ watchdog : 1 Frequency Hypothesis RF (Hz) : -1000 RSRP (dBm) : -21474836.00 RSRQ (dB) : -25.99 Channel estimation state (Cell-spec.) : LOW CINR Channel estimation state (UE-spec.) : LOW CINR Channel estimation state (MBSFN) : LOW CINR Channel estimation CINR : 0.00 Channel length : SHORTAGC
AGC RX gain (dB) : 54.87
RX PSD BO (dBFs) : -21.78
RX PSD (dBm) : -98.39
Noise level RS (dBm) : -126.46
Digital gain (dB) : 9.05
CINR RS (dB) : -16.11
NARROWBANDS
Last DL NB : Central
Last UL NB : 0
AFC
Frequency offset RF (Hz) : 43
Frequency offset BB (Hz) : 0
PBCH
MIB received quantity : 1429
MIB timeout quantity : 0OK
SYSTEM FSM
+--------------------------+--------------------+ | FSM | STATE | +--------------------------+--------------------+ | RRC TOP FSM |INITIAL | | RRC SEARCH FSM |INITIAL | | RRC ACTIVE FSM |NULL | | PMM PLMN FSM |PARKING | | EMM MAIN FSM |NULL | | EMM AUTH FSM |NULL | | EMM CONN FSM |NULL | | EMM TAU FSM |NULL | | EMM TEST FSM |NULL | | ESM BEARER FSM |BEARER_NULL | | SMS MT FSM |IDLE | | SMS MO FSM |IDLE | | HP MAIN FSM |IDLE | | HP USIM FSM |ABSENT | | HP SMS MO FSM |IDLE | | HP SMS MT FSM |IDLE | | HP CAT FSM |NULL | +--------------------------+--------------------+OK
+CEREG: 2,4
-
@tlanier
Maybe Cat M1 coverage in your area just isn’t very good yet, Verizon only uses one band (band 13) for Cat M1 while on mobile phones they support more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đź’—
Register Login