Firmware Release v1.20.1

[Clemens]

@robert-hh said in Firmware Release v1.20.1:

pycom.wifi_on_boot(True, True)

>>> pycom.wifi_on_boot()
False
>>> pycom.wifi_on_boot(True, True)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
OSError: the requested operation failed

[robert-hh]

@Clemens That wifi_on_boot() issue is a different topic and has been fixed with today's build for the Dev branch. AFIK it is not yet in the 'official' version.
Edit: It looks like there is a lag in the Pycom update. The updater does not show V1.20.1, and the download page for firmware packages is also not updated.

[rcolistete]

Please update the links for all Pycom devices in :
https://docs.pycom.io/advance/downgrade/
to include the version 1.20.1 for manual firmware download.

[Clemens]

One software is after the repeated firmware update with the checked option erase filesystem now running. The second one outputs still the same error.

[berni]

After upgrading to 1.20.1, I started having crashes when setting up the frequencies for the Nano-Gateway code:

Guru Meditation Error: Core  1 panic'ed (Cache disabled but cached memory region accessed)
Guru Meditation Error: Core  1 panic'ed (IllegalInstruction). Exception was unhandled.
Memory dump at 0x40201f50: bad00bad bad00bad bad00bad
Guru Meditation Error: Core  1 panic'ed (IllegalInstruction). Exception was unhandled.
Memory dump at 0x40201f50: bad00bad bad00bad bad00bad
Guru Meditation Error: Core  1 panic'ed (IllegalInstruction). Exception was unhandled.

This happens somehow randomly, after a few cycles of deep sleep/transmission, but even the Watchdog timer becomes useless.

Then I downgraded to 1.20.rc13. Now, the code doesn't work and stops in this line:

>>> from network import LoRa
>>> lora = LoRa(mode=LoRa.LORAWAN)
>>> lora.nvram_erase()
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
OSError: the requested operation failed
>>> lora.nvram_save()
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
OSError: the requested operation failed

Is there any way to go back to 1.20.rc13 and have these function working again? I suspect there must be some low level changes on the LoRa radio.

[iwahdan]

Hello @berni , Thanks for reporting that issue, we will work on reproducing it, meanwhile regarding the exception you get when downgrading to rc13 , this should be due to the new formatting mechanism of NVS introduced in IDF_v3.2 (1.20.1) , so when you downgrade the FW to previous version of IDF, NVS might not be initialise successfully, to solve this issue you can erase the device and flash the Firmware again.

Thanks

[robert-hh]

@berni @iwahdan Setting the frequency and/or removing channels is a topic which anyhow does not seem to work. I have to look at it. Even when I set in the abp_node.py sample code the device to use a single frequency only, it transmits at the three default frequencies. That was different once.

[oligauc]

@berni Using a terminal / command prompt, please can you go to the pycom firmware updater folder (e.g "C:\Program Files (x86)\Pycom\Pycom Firmware Update" in windows) and type the following command:

pycom-fwtool-cli.exe -p "your com port" erase_all

After erasing please re-flash your device.

Please let us know how it goes, Thanks

[oligauc]

@robert-hh We carried out some tests with the abp node / RAK gateway in the EU region. If you add 3 channels with the same frequency and remove the others, it will send at 1 frequency.

If you do not add / remove channels manually, then the node uses frequency hopping.

[robert-hh]

@oligauc I think i did that in my code, which is the abp_node example. I'll repeat it.

[robert-hh]

@oligauc I just verified that, after a clean erase & upload. Then only one frequency is used. There may have been a modified set-up. I purchased a SDR recently, which allows to see the frequencies used. It's interesting to see all the different activities in the 868 band.

[robert-hh]

@oligauc I tried another device, a LoPy now, and that one was completely messy. After setting a Lora parameter wrong, I could not change that any more. Only erasing flash and re-installing the firmware made it working again. Besides that, below is a nice picture showing how a message with DR=0 looks in the waterfall diagram.

[berni]

Thank you @oligauc!

This fixed the issue with lora.nvram_erase(). Also, I was having troubles deleting the flash from the pycom firmware upgrade software (it will time out if I select that option, working fine if I just upgrade the FW).

I have observed that having pybytes active and doing my own LoRa OTTA (saving on nvram after joining the network) caused that the join flag was deleted and never connected again. I have disabled the pybytes in the pybytes_config.jsonfile adding {"pybytes_autostart": false} and that fixed the issue.

I have been running the program on v1.20.1.r1 without pybytes and haven't had any Guru Meditation errors for a while. I'll keep trying...

[cmisztur]

@robert-hh said in Firmware Release v1.20.1:

I build the image myself

Right.

pyexec_frozen_module("_main.py");

[robert-hh]

@cmisztur It's not that _main.py or _boot.py are executed, it's what is frozen into the image as _boot.py or _main.py.

[serafimsaudade]

I'm getting this error when compiling.
I clone the repo and try to compile.

[robert-hh]

@serafimsaudade IOt may be a problem with the pycom esp-idf.
in the folder pycom-esp-idf, execute the command:

git checkout idf_v3.2
git submodule sync
git submodule update --init

Also, in you pycom esp32 source directory, issue the commands:

git checkout Dev
git submodule sync
git submodule update --init

Then, a

make BOARD=WIPY clean
make BOARD=WIPY

[serafimsaudade]

@robert-hh Tks for the tip.

That was the idf submodules.
problem solve. :)

[serafimsaudade]

Hi again,
I'm trying to connect gpy to wireless, but when I do wlan.scan() get this error:

wlan = WLAN(mode=WLAN.STA_AP,ssid="teste", auth=(WLAN.WPA2, 'pass'))
nets = wlan.scan()
OSError: Scan operation Failed!

This work on others fw version.

[robert-hh]

@serafimsaudade The following sequence works for me:

from network import WLAN
wlan = WLAN(WLAN.STA_AP)
wlan.scan()