LoPy Nano-Gateway Extended (Timeout and Retry)

[fbt]

Hi @Roberto , in case i wanted to support more than 2 nodes, i.e 8 nodes, which parameters should i modify on the gateway code?. thanks

[fbt]

Hi @gouao, did you get any answer about the compatibility of seeeduino lorawan and lopy? thanks

[gouao]

@fbt hello mate, unfortunately i could't get any informations concerning this..
If you find out something please let me know !

All the best!

[fbt]

Thanks @gouao ... any reply about this issue @jmarcelino ? thanks

[jmarcelino]

@fbt
For a LoRaWAN device you'd usually want to be using https://github.com/pycom/pycom-libraries/tree/master/examples/lorawan-nano-gateway and not the code on the post. This code is for raw LoRa only.

8 devices on the LoRaWAN gateway shouldn't be a problem as long as they don't transmit at the same time.

[heut]

Hi @Roberto and @Butch

Thank you very much for the interesting discussion. I'm currently trying to get the plain code (node_1.py and nano_gateway.py) working on my LoPy(s), without success so far. I have both updated to the latest Firmware for Switzerland and sitting in an extension board with antennas attached. When running the code respective code on the LoPys, not a single message is delivered and acknowledged. All messages that are received on the gateway node have the size 0.
From time to time the node_1.py LoPy shows a longer LED blink in blue instead of the heartbeat.

Any idea what I might be doing wrong?

Best
heut

[seb]

@heut try adding a delay in your loop, e.g. 50ms, this seemed to vastly improve the situation for me

[heut]

@seb Thank you for the hint. However, that didn't make a difference in my situation at all. There is still not a single message transmitted. Any other suggestions what it might be?

Just to be sure, here the sources I'm using.

Gateway:

import socket
import struct
from network import LoRa
import time

# A basic package header
# B: 1 byte for the deviceId
# B: 1 byte for the pkg size
# B: 1 byte for the messageId
# %ds: Formated string for string
_LORA_PKG_FORMAT = "!BBB%ds"

# A basic ack package
# B: 1 byte for the deviceId
# B: 1 byte for the pkg size
# B: 1 byte for the messageId
# B: 1 byte for the Ok (200) or error messages
_LORA_PKG_ACK_FORMAT = "BBBB"

# Open a Lora Socket, use rx_iq to avoid listening to our own messages
#lora = LoRa(mode=LoRa.LORA, tx_iq=True, frequency=870000000, sf=7)
lora = LoRa(mode=LoRa.LORA, tx_iq=True)
lora_sock = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
lora_sock.setblocking(False)

while (True):

    # Since the maximum body size in the protocol is 255 the request is limited to 512 bytes
    recv_pkg = lora_sock.recv(512)


    # If at least a message with the header is received process it
    if (len(recv_pkg) > 3):
        print("Package received")
        recv_pkg_len = recv_pkg[1]

        # If message is corrupted should not continue processing
        #if (not len(recv_pkg) == recv_pkg_len + 3):
            #continue

        # Unpack the message based on the protocol definition
        device_id, pkg_len, msg_id, msg = struct.unpack(_LORA_PKG_FORMAT % recv_pkg_len, recv_pkg)

        # Respond to the device with an acknoledge package
        # time.sleep(0.15)
        ack_pkg = struct.pack(_LORA_PKG_ACK_FORMAT, device_id, 1, msg_id, 200)
        lora_sock.send(ack_pkg)

        print("sent ack")

    time.sleep(0.2)

        # Do any extra processing required for the package. Keep in mind it should be as fast as posible
        # to make sure that the other clients are not waiting too long for their messages to be acknoleged

Node:

import os
import socket
import time
import struct
from network import LoRa
from uos import urandom

# A basic package header
# B: 1 byte for the deviceId
# B: 1 byte for the pkg size
# B: 1 byte for the messageId
# %ds: Formated string for string
_LORA_PKG_FORMAT = "!BBB%ds"

# A basic ack package
# B: 1 byte for the deviceId
# B: 1 byte for the pkg size
# B: 1 byte for the messageId
# B: 1 byte for the Ok (200) or error messages
_LORA_PKG_ACK_FORMAT = "BBBB"

# This device ID, use different device id for each device
_DEVICE_ID = 0x01
_MAX_ACK_TIME = 5000
_RETRY_COUNT = 3


# Open a Lora Socket, use tx_iq to avoid listening to our own messages
#lora = LoRa(mode=LoRa.LORA, tx_iq=True, frequency=870000000, sf=7)
lora = LoRa(mode=LoRa.LORA, tx_iq=True)
lora_sock = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
lora_sock.setblocking(False)

# Method to increase message id and keep in between 1 and 255
msg_id = 0
def increase_msg_id():
    global msg_id
    msg_id = (msg_id + 1) & 0xFF

# Method for acknoledge waiting time keep
def check_ack_time(from_time):
    current_time = time.ticks_ms()
    return (current_time - from_time > _MAX_ACK_TIME)

# Method to send messages
def send_msg(msg):
    print("SEND MSG")
    print(msg)
    global msg_id
    retry = _RETRY_COUNT
    while (retry > 0 and not retry == -1):
        retry -= 1
        pkg = struct.pack(_LORA_PKG_FORMAT % len(msg), _DEVICE_ID, len(msg), msg_id, msg)
        lora_sock.send(pkg)

        # Wait for the response from the server.
        start_time = time.ticks_ms()

        while(not check_ack_time(start_time)):
            #print("RECV_ACK")
            recv_ack = lora_sock.recv(256)
            # If a message of the size of the acknoledge message is received
            if (len(recv_ack) == 4):
                print("SIZE CORRECT")
                device_id, pkg_len, recv_msg_id, status = struct.unpack(_LORA_PKG_ACK_FORMAT, recv_ack)
                if (device_id == _DEVICE_ID and recv_msg_id == msg_id):
                    if (status == 200):
                        # Do some code if your message arrived at the central
                        return True
                    else:
                        return False
        time.sleep_ms(urandom(1)[0] << 2)
    return False

# Main Loop
while(True):

    success = send_msg("DEVICE %d HERE" % _DEVICE_ID)
    if (success):
        print("ACK RECEIVED: %d" % msg_id)
        increase_msg_id()
    else:
        print("MESSAGE FAILED")
        # Manage the error message

[seb]

@heut I will have a closer look at your code now but in the mean time, a few things that often catch users out:

• Make sure both LoPy modules are running the same firmware
• Please set the frequency to ensure it is the same on both

One thing I have already noticed is you have set tx_iq on both the node and the gateway, it should be rx_iq=True for the gateway and tx_iq=True on the nodes.

[heut]

@seb Thank you so much, that was the point! Setting rx_iq instead of tx_iq True on the Gateway solved the issue. And frequency is set as well.

[Archana Kadam]

@roberto
I have used the above code and the communication between the one node and gateway is generated, but the device id and package. What is the procedure to get the exact connected device.Please update as soon as possible your help will be appreciable.

Thank You