Firmware update, not possible on either windows or mac osx...
soren last edited by soren
Now it freakin works.. SOooo, there's a difference between vcp and the dxx ftdi drivers.. i did not know about the vcp before until just now. installing the vcp seems to be working now. also, i have currently unloaded the apple ftdi driver which might also be necessary but i'm not sure. phew, this is a rather frustrating process to go through.. thanks so much for the help @jmarcelino though!
I don't see a cu.usbserial-xxxx... no, sorry. this is what i get:
crw-rw-rw- 1 root wheel 20, 3 Mar 23 10:41 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 20, 5 Mar 23 10:41 /dev/cu.JabraStylev130-CSRGAIA
crw-rw-rw- 1 root wheel 20, 7 Mar 23 10:41 /dev/cu.iPhone-WirelessiAP
crw-rw-rw- 1 root wheel 20, 1 Mar 23 10:41 /dev/cu.lpss-serial2
here's my result of kextstat -b com.FTDI.driver.FTDIUSBSerialDriver:
list itemIndex Refs Address Size Wired Name (Version) UUID <Linked Against>
so.. this looks like the ftdi driver is not being found at all, right?
Ok that looks good, so what do you get from a
ls -l /dev/cu.*?
Is there a line with
/dev/cu.usbserial-xxxxxxxx? (the xxxxxxxx part doesn't really matter)
EDIT Also can you post the result of
kextstat -b com.FTDI.driver.FTDIUSBSerialDriver
soren last edited by soren
@jmarcelino yes, my mac see's the unit as a ft230x basic UART.
EDIT: I also tried a different USB cable now, just for the sake of excluding that.. no difference
Try looking in (Apple) menu -> About This Mac -> press System Report and then choose USB from the list
If your Mac can see the Expansion Board you'll have a device saying FT230X Basic UART , like this:
@jmarcelino I do have ftdi drivers installed, but that does not seem to make a difference on my osx system. It shouldn't be the USB C dongle obscuring things, because it's working just fine with eg. Arduino boards
I installed FTDI drivers on windows now which made it possible to update on my windows PC (actually thought that was only necessary for mac), but having installed ftdi drivers on my mac doesn't make any difference unfortunately..
rskoniec last edited by
@soren Or http://www.ftdichip.com/Drivers/CDM/CDM v2.12.26 WHQL Certified.zip For Windows. ;o)
Yes both firmware update and REPL are done over the UART serial.
If you're not seeing the correct device try installing the FTDI drivers from http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_3.dmg
@jmarcelino Hi, i did not see your reply in that thread sorry.
Looking into it now. I didn't realize the REPL and firmware update was related so closely
You posted a few days ago in another thread saying you were trying to use the cu.lpss-serial2 device to access the REPL on your Mac and I replied saying that wasn't the correct device.
Are you still trying to use cu.lpss-serial2 in the firmware upgrade tool? Have you found the correct device ?
rskoniec last edited by rskoniec
With W10 installation of the VCP (Virtual COM Port) driver is pretty straightforward.
I don't know if it is relevant but when i wanted to update/connect through USB I had to install the USB driver manually. Mine called FTDI driver where VCP or D2XX are types of drivers. With one of the two it said it was installed but still i coudn't update/connect.
OK, I took my notebook with Windows 10 Pro x64 with internet access and plug LoPy on Expansion Board to it for the very first time.
Here is Device Manager just after connection:
After about 30 seconds Windows Auto Update mechanism has done all the job: