SiPy's ID and PAC

[Jordi]

@daniel Fortunately I have tried your Pycom Firmware Update from a virtualized Windows on Debian.

Using Linux firmware updater on Debian, reading from Python SiPy ID and PAC are all ffff.fff. But using Windows updater version, I am able to read properly ID and PAC from Python (Linux or Windows).

Hopefully you will be able to check and fix updater for Linux.

Thank you for your answers and collaboration.

[michal.zykov]

Hi @bucknall!

Even if I use the mentioned snippet the same output can be seen, i.e. b'ffffffff'. Any suggestion?

Mike

[bucknall]

Hi @michal.zykov! First of all, have you updated your SiPy? And if so are you using Debian (Linux) to update your device?

[michal.zykov]

Hi @bucknall!

Yep, I already updated SiPy by using Linux updater (Fedora 25) - SiPy firmware 1.6.7.b1. I'm able to send a print-screen that it was successful.

Thx,
Mike

[bucknall]

@michal.zykov, we've identified a problem with the Linux Firmware Updater and are handling it now. If you could use the Windows or Mac OS Firmware Update tool, that should get you up & running for the time being!

Apologies about this! We're working to get it sorted asap!

Thanks!

[michal.zykov]

Hi @bucknall!

I've tried to re-flash SiPy by using MS Windows firmware updater. It works great! Thank you! Hope, you'll be able to fix Linux firmware updater soon.

Mike

[josep.salom]

Hello,

I have the same problem. How could I find the right Device ID and PAC?

I'm using Mac OS X.

[Xykon]

@josep-salom Can you please provide more details? What is the output you get from the commands?

[josep.salom]

@xykon I'm using the procedure as indicated in https://docs.pycom.io/chapter/gettingstarted/registration/sigfox.html, and I got:

>>>
b'ffffffff'
b'ffffffffffffffff'
>
MicroPython v1.8.6-470-gf41d0f27 on 2017-02-22; SiPy with ESP32
Type "help()" for more information.
>>>

which are not correct ID and PAC.

I'm using SiPy module with Pysense, on a Mac OS X 10.11.6 running Visual Studio Code.

[josep.salom]

@xykon I've just upgraded SiPy and still have the problem:

>>>
b'ffffffff'
b'ffffffffffffffff'
>
Pycom MicroPython 1.18.0 [v1.8.6-849-046b350] on 2018-06-01; SiPy with ESP32
Type "help()" for more information.
>>>

How could I get the right ID and PAC?

[Xykon]

@josep-salom Sigfox registration requires using the firmware updater in online mode.

[josep.salom]

@xykon So sorry, I'm very new on that. What does it exactly mean? How should I do that?

[Xykon]

@josep-salom You need to solve this problem first so that you can use the firmware updater in online mode. This is required to get your Sigfox ID and PAC allocated. I suggest you email us with your IP address so that we can do some testing.

[Colateral]

@bucknall For SIgfox backend registration I beleive I need to put the ID and and PAC out put from with hexlifiy

print("ID ", ubinascii.hexlify(sigfox.id()))
print("PAC ", ubinascii.hexlify(sigfox.pac()))

in my case is:

ID b'004e3d90'
PAC b'c957cd18b7848c0'

so ID that I typed is '004e3d90' and PAC 'c957cd18b7848c0'

The device seems to be registered but on backend device webpage I can not see it online at all. How I do I know when is connected to the (Luxembourg) Sigfox network and will get online?

It is done immediately or shall I wait?