BME280 on the LoPy

[ledbelly2142]

@Butch
That looks to be it. The I2C address was 77, not 76... weird. I did not think to check the I2C address.

Thanks!

[Devang Sharma]

Hello Everyone,
I'm using LoPy and I've got the similar type of error as @binux got.

I'm getting the following error:

This is my code:

Please guide me solving this!
Thank You.

[robert-hh]

@devang-sharma The required positional argument is 'little' in the call of from_bytes(). The API was changed a while ago. You have to modify the script BM280.py into:

        result = int.from_bytes(
            self._i2c.readfrom_mem(self._address, register, 2), little) & 0xFFFF

The same in function readU8().

[Devang Sharma]

@robert-hh I've done changes as you said but got the NameError as:

"name 'little' is not defined". How can I solve it?
Thank You.

[robert-hh]

@devang-sharma Sorry, it should be a string:

        result = int.from_bytes(
            self._i2c.readfrom_mem(self._address, register, 2), 'little') & 0xFFFF

[Devang Sharma]

@robert-hh, that worked! Thanks, but the same error for write8:

Is there any link to the changed API or library? That would be better than posting every single error! :'D

EDIT: Solved the error. Replaced value.to_bytes(1) with "value"! No more Errors!

[robert-hh]

@devang-sharma No specific API doc needed, since it is standard Python behaviour now. It was incompatible before, but I'm not shure, for which MicroPython version. It may be that the Pycom branch always was compatible to the Standard.
And yes, even in that case changes toward language compliance may break code, so it should be noted.

[robd]

Hello,
There are quite a few entries on the BME280.
I have been reading them and I am still not able to fix my issues.
I have tried several of the libraries and I am just at a stand still.
When I do a scan of the I2C port I get 0x76 so I know that the sensor is there.
What I get is as follows (firmware rev 1.10.2.b1)

Thank you,

[robert-hh]

@robd Actually, which bme280 code are you using at the moment? I'm a little bit lost too.

[Devang Sharma]

@robd I've faced a similar issue and added argument 'little' as @robert-hh suggested which worked for me. I don't know which library you're using. But I've been using this:

https://github.com/LoRaWeather/BME280-LoPy-TTN/tree/master/Program/lib

[seb]

This post is deleted!

[robd]

@devang-sharma thank you for the link. I really hate learning curves. I tried the TTN libraries and I still have issues. How are you calling the library?
I am trying with (firmware version 1.10.2.b1)

from machine import I2C
import BME280
i2c = I2C(0,I2C.MASTER, baudrate=100000)
bme = bme280.BM280(i2c=i2c)

print('Temp = ', bme280.temperate())

the errors I am getting are

I then tried to see if my sensor was readable and I did

from machine import I2C
i2c = I2C(0, I2C.MASTER, baudrate=100000)
i2c.scan()

which returned 118 (0x76)
then I did the following

Any pointers to my errors?

Thank you

[robd]

@robert-hh I have tired several libraries, LoPy_BME280, oscarBravo-wipy_bme280, and mpy_bme280_esp8266.

https://github.com/ButchAnton/LoPy_BME280
https://github.com/catdog2/mpy_bme280_esp8266
https://bitbucket.org/oscarBravo/wipy_bme280/src/7c03d16f48154a55a9c09af65049b0f03ef6c005?at=default

and thank you to @devang-sharma
https://github.com/LoRaWeather/BME280-LoPy-TTN/tree/master/Program/lib

I must be doing something really wrong for nothing to work correctly.
I switched over to a Si7021 and I was able to get that to work but I need to use the BME280.

Thanks,

[Devang Sharma]

@robd The first error you're getting is because of indentation of the return function. Write it within def humidity(self). I guess you're new to python, it'd be better if you read docs properly.

The second error is due to the way you've used import BME280. The library has a class BME280. There are 2 ways to solve this:

1. You can import it as from BME280 import * and make a constructor just after i2c something like this: bme = BME280(address=BME280_I2CADDR, i2c=i2c)

OR
2. keep it as import BME280 and constructor as:
bme = BME280.BME280(address=BME280_I2CADDR, i2c=i2c)

Make sure to use the same name as defined in the library.

I hope this helps you.

[robd]

@devang-sharma the code used was from https://github.com/LoRaWeather/BME280-LoPy-TTN/tree/master/Program/lib
I copied everything over as it was and didn't modify anything.
The code which I tried to write and didn't work was

from machine import I2C
import BME280
i2c = I2C(0,I2C.MASTER, baudrate=100000)

print('Temp = ', BME280.temperature())

Yes I am new to python and right now it is kicking me, I didn't see any docs other than small comments in the code. So it was me trying to feel around and get this sensor working.
I was able to get a SI7021(different code) to work but not the BME280.
I will look at and try to understand your suggestions.
Thank you for your help

[Devang Sharma]

@robd I think you didn't get me correctly.
Anyways, try the code as below:

from machine import I2C
import BME280
i2c = I2C(0,I2C.MASTER, baudrate=100000)
bme = BME280.BME280(address=BME280_I2CADDR, i2c=i2c)
print('Temp = ', bme.temperature())

[Lucas_Vieira]

Hello guys. i'm having similar problems here. Would you help me?

from machine import I2C
import bme280 # from bme280

i2c = I2C(0, I2C.MASTER)             # create and init as a master
i2c.init(I2C.MASTER, baudrate=10000) # init as a master
i2c.scan()
print(i2c.scan())
bmet = []   # Lista com as temperaturas lidas com o BME280
bmeh = []   # Lista com as umiadades lidas com o BME280
bmep = []   # Lista com as pressoes lidas com o BME280
bme = bme280.BME280(i2c=i2c, pressure_mode=bme280.OSAMPLE_8, iir=bme280.FILTER_8)
bme_s = True

while True:
    for cycles in range(10):
        # Le valores BME280 com media para ter maior precisao :
        numreadings = 5
        samples_temperature = [0.0]*numreadings; mean_temperature = 0.0
        samples_pressure = [0.0]*numreadings; mean_pressure = 0.0
        samples_humidity = [0.0]*numreadings; mean_humidity = 0.0
        for i in range (numreadings):
            samples_temperature[i], samples_pressure[i], samples_humidity[i] = bme.values
        mean_temperature = sum(samples_temperature)/len(samples_temperature)
        mean_pressure = sum(samples_pressure)/len(samples_pressure)
        mean_humidity = sum(samples_humidity)/len(samples_humidity)
        t = mean_temperature
        p = mean_pressure/101325   # Pa -> hectoPa
        h = mean_humidity
        bmet.append(t)
        bmep.append(p)
        bmeh.append(h)

    print(t)
    print(p)
    #print(h)
    time.sleep(3)

My problems:

File lib bme280:
bme280.py

[svonbentzel]

@Lucas_Vieira i2c.scan() reports the correct sensor? 108 (I mean)??

[svonbentzel]

@Lucas_Vieira

Do you have tried the other modes?
The sensor is correct wired? Sda / p9 and scl p10 in example?

[Lucas_Vieira]

@svonbentzel thank you very much for reply!

1. i2c.scan() report: [118]
2. What modes are they? I did not understand what you meant.
3. Yes, the pins are correct!

Note: Right now, it's running perfect. No more errors appear in the code, it is strange at least hahaha. However, since yesterday I have not received any sign of humidity, is there any clue where the error is? I can not find.
(I uncommented "print (h)" in the last code).

The image data is pressure (1.0), temperature (27ºC) and humidity (0.0) respectively.