@kjm To check whether the LTE sim card is deactivated or not you need to contact the service provider.

@JABarrett85 Thanks. Are you using CAT-M1 or NB-IoT? I couldn't tell from Soracom's website which they supported.

@Paul-Thornton Have you found any update/change on Vodafone's rollout in the UK in the last 1 yr? It will be highly appreciate if you share your knowledge on this issue.

Update: Some more information... I am in the USA, and registered the SIM card on a verizon network that mentioned it was compatible with the FiPY IMEI. Below is a screenshot of some commands. Firmware is 33080, this is old...could this be the issue?, but it seems Pycom is releasing a new modem update fix soon? Do I need to set the APN manually, or is there something I am missing? I have a CATM1 modem with the same kind of SIM card and it gets signal just fine here. [image: 1534859163191-dd2f561e-2edc-4d5e-bedc-133837e0bb1b-image.png]

@jmarcelino Thank you for all your help. We had provided Verizon the ICCID and IMEI 10 days ago at the time of provisioning request, but for some reason the IMEI was mixed up....and lost in translation. It was rectified over a troubleshooting ticket with Verizon.

I saw your updated NB-IoT section in the documentation and would like to clarify one thing. Does below mean that an NB-IoT connection between GPy and my AMRI LTE 100 is not possible as of this moment? Current NB-IoT limitations At the moment the NB-IoT firmware supplied by Sequans only support Ericsson base stations configured for In-Band mode. Standalone and guard-band modes will be supported in a later release. Support for Huawei base stations is also limited and only lab testing with Huawei eNodeB is recommended at the moment. Full support for Huawei is planned for early Q2 2018.

no problem, I found it yesterday :)

I think Hologram.io is compatible but I have not yet tested that.

Thank you @jmarcelino for fast reply.

@rskoniec said in Nano-SIM Card Orentation: @seb I think FiPy's Pinout Diagram is perfect place for the update with this picture. @seb This should also be covered by new datasheets (GPy, FiPy).

Thks jmar, have just save me burning hours.. Cheers dude, pizza's & beers on me!