@robert-hh Thank you for your advice. I could send and receive some data from raspberry pi to lopy4. Now I am trying to send an ASCII txt file (1 KB) from raspberry pi to lopy 4 but I couldn't send the image. I would appreciate your guidance, if you help me out. Thank you in advance. regards Tam

Just to bring it back on the workbench ;-) What are the plans to implement this feature? Cheers, Thomas

@securigy Sometimes They work, sometimes not. my experience with Lora: Always start tests from a fresh power-up.

Nice one! It is working, i didn't thought about that.... Thanks!

@hsn548 Hi I am senthamil doing my master's in telecommunication from University of south Australia. In my project progress, I am intended to send an image from raspberry pi 3 to Lopy 4 through WiFi. It would be appreciated, if you guide me to send an image from raspberry pi 3 to Lopy 4. Thanks in advance!!!! Regards senthamil

@mfalkvidd I also have changed my node config to: #define EU868_RX_WND_2_FREQ 869525000 #define EU868_RX_WND_2_DR DR_3 but the downlink is not received, lopy4 is configured with SF12BW125 and DR0, I can see the downlink from the gateway and the frequency and SF match with my node config but it doesn't work, uplinks are OK [ 786.969] Sent downlink packet scheduled on 246.579, at 869.525 Mhz using SF9BW125: b'`\xf7\x1f\x01&\x00\x01\x00\x01@\xceK\x9c\xe2'

Did you ever get it work? Any advise for me, as I am in the exact same situation?

@robert-hh Ho boy, you might be right, I test it with an other pin and come back to you if I still have problems ! ;)

@securigy The gateway connects to the TTN router via internet. It will not connect to another gateway. It will accept messages from any node, not only yours. Accordingly, nodes can connect to any gateway. The pycom modules do not work well as gateway, even single-channel gateway. One you have a full service gateway set up, getting the node to work should be easy.

@securigy The single packet you have seen may be just noise. We see these all the time. The CRC should be wrong.

@robert-hh Wow, it works!!!! Thank you man, you are my hero!!. Seriously, I am so grateful.