C
Take a look to an arduino like wrapper for pycom at https://github.com/dinosd/pyCom/blob/master/examples/arduino_sample.py
import arduino
estado = 0
estado2 = 0
cont = 0
A = 10
B = 11
C = 12
D = 13
E = 14
def setup():
arduino.pinMode(15, "ANALOG_INPUT") #PIN P15, there is no mode analog input in arduino but pycom needs it
arduino.pinMode(8, "INPUT") # modes are "INPUT","OUTPUT","INPUT_PULLUP","INPUT_PULLDOWN","ANALOG_INPUT"
arduino.pinMode(7, "INPUT")
arduino.pinMode(A, "OUTPUT")
arduino.pinMode(B, "OUTPUT")
arduino.pinMode(C, "OUTPUT")
arduino.pinMode(D, "OUTPUT")
arduino.pinMode(E, "OUTPUT")
def loop():
global estado, estado2, cont
value = arduino.analogRead(13)
millivolts = 1100 * value / 1.1 #max volts for analog in is 1.1V
db = millivolts / 10
print(db, "DB")
estado2 = arduino.digitalRead(8)
if estado2: #this means high or you can write if estado2==1
estado = arduino.digitalRead(7)
if estado:
arduino.delay(500)
cont += 1
if cont==1:
arduino.digitalWrite(A, 1)
arduino.digitalWrite(B, 1)
arduino.digitalWrite(C, 1)
arduino.digitalWrite(D, 1)
arduino.digitalWrite(E, 1)
setup()
while True:
loop()
