@manel Hi, have you tried doing a power cycle? If it still doesn't work, try updating the firmware and checking the "Erase flash file system" box.

Hi @Martinnn, empty folders are ignored when uploading. If you put a file in there, it'll upload it. Or you could create one via FTP on the device.

@brossingo G5 is an input only pin, like G4, G0, G3, G31 and G30. Try another pin, like G22 or G17 or G7 or G6 or ....

@dan issue persists with 1.0.3

@pkilcoyne Known issue, we are working on it

Hi @sslupsky, Which version did you install? This specific issue has been fixed (at least I can't reproduce it and there have been numerous updates in the past year). We know about an issue in 1.26.1, which caused some issues with Pymakr. You can follow this post for more info.

@Ralph, thanks very much. It now works again.

I was able to upload it by not safe booting, but it would be nice to be able to boot in safe mode with this.

@rg_elect I have found the youtube Video@ alex' s corner which has a much better explanation of Nano gateways and also sending data to the lopy. :)

Hi @jhollan3 Pylint and the Python extension aren't really meant for MicroPython or the Pycom boards so it'll throw a lot of errors. There's no linter or extension I know of that would work correctly.

@philwilkinson In your traceback I see the 'Pymakr' package folder with a capital, instead of lowercase. This is a known issue (happened after pymakr renamed in v1.2.5). I just added this to the known issues with the solution in the readme file on the develop branch of the pymakr github. Read it here, at the bottom of the page: https://github.com/pycom/pymakr-atom/tree/develop#any-error-where-the-traceback-contains-atompackagespymakr-with-a-capital-p Try the solutions listed there and let me know if that fixes your issue.

@w0run try Visual Studio Code (https://code.visualstudio.com/) with the PyMakr plugin. Works very well.

@lianamelissa said in How can i receive big data from socket: Hi,how I can receive large data from socket with loop? The size of the data can changed during the program so it must be loop. Thanks. What is large? Figures please.

@stefan85e Have you tried disabling the safe-boot feature, does this work?

@jmarcelino In the board, I have a custom code running, and it shows what it should on the console, but whenever I try to upload a project, it fails. It had worked until I updated the plugin to the last version.

Could you try deleting C:\Users\Stefan\.atom\packages\pymakr\ and re-install the pymakr plugin

@seb Same reaction here... I think however there are cases when Ctrl-C will not interrupt the currently running code right away, but have an effect only once the current call is finished or something, maybe that's related? We don't quite know what code was running... Or maybe... @pierrot10, had you actually deleted the console in Atom (clicked on the bottom part of the window) before hitting Ctrl-C?

solved There was another folder that was open in the project Tab that seem to be creating some confusion. Once I removed it, then it started working properly. But still when doing download just main and boot are read. How can I upload the libraries ?

@ralph great stuff, thanks. What a PITA error :(