Hi,
I compiled a firmware for you to use on a Lopy4 (here) to check the EAGAIN error cause.
For a case without error, it will output the following:
Pycom MicroPython 1.20.2.r4 [v1.20.1.r2-357-g6153b01d3-dirty] on 2021-01-18; LoPy4 with ESP32
Type "help()" for more information.
>>> Running selected lines
>>>
>>>
Not yet joined...
Not yet joined...
Not yet joined...
Joined
b''
[TASK_LoRa] CMD TX
[LoRaMAC] returning status 0
>
Pycom MicroPython 1.20.2.r4 [v1.20.1.r2-357-g6153b01d3-dirty] on 2021-01-18; LoPy4 with ESP32
Type "help()" for more information.
>>>
You should be able to use the script you already wrote, but if you want to use the example I used:
from network import LoRa
import socket
import time
import ubinascii
# Initialise LoRa in LORAWAN mode.
# Please pick the region that matches where you are using the device:
# Asia = LoRa.AS923
# Australia = LoRa.AU915
# Europe = LoRa.EU868
# United States = LoRa.US915
lora = LoRa(mode=LoRa.LORAWAN, region=LoRa.EU868)
# create an OTAA authentication parameters, change them to the provided credentials
app_eui = ubinascii.unhexlify('')
app_key = ubinascii.unhexlify('')
#uncomment to use LoRaWAN application provided dev_eui
dev_eui = ubinascii.unhexlify('')
# join a network using OTAA (Over the Air Activation)
#uncomment below to use LoRaWAN application provided dev_eui
#lora.join(activation=LoRa.OTAA, auth=(app_eui, app_key), timeout=0)
lora.join(activation=LoRa.OTAA, auth=(dev_eui, app_eui, app_key), timeout=0)
# wait until the module has joined the network
while not lora.has_joined():
time.sleep(2.5)
print('Not yet joined...')
print('Joined')
# create a LoRa socket
s = socket.socket(socket.AF_LORA, socket.SOCK_RAW)
# set the LoRaWAN data rate
s.setsockopt(socket.SOL_LORA, socket.SO_DR, 5)
# make the socket blocking
# (waits for the data to be sent and for the 2 receive windows to expire)
s.setblocking(False)
# send some data
s.send(bytes([0x01, 0x02, 0x03]))
# make the socket non-blocking
# (because if there's no data received it will block forever...)
s.setblocking(False)
# get any data received (if any...)
data = s.recv(64)
print(data)
